Black Box ServSwitch Wizard DVI/USB SRX, ACU5501A-R4 manual Operation, Power connections

Page 19

Chapter 4: Operation

3.2.2.6 Power connections

1Connect the output lead of the supplied power adapter to the socket labeled ‘POWER‘ on the remote module as shown in Figures 3-21 and 3-22:

WER PO

	w
S
v	B
r
e
S

Figure 3-21. Attaching the power adapter connection

REMO

OUT

R

WE

PO

v r e S

Figure 3-22. Attaching the power adapter connection on the dual-variant remote module

2Insert the IEC connector of the separate power cord into the corresponding socket of the power adapter. Connect the other end of the power cord to a nearby mains socket.

3After all connections are made, power up the monitor and remote module and then switch on the computer.

724-746-5500 blackbox.com

Page 19

Image 19

Contents ServSwitch Wizard DVI/USB SRX Trademarks Used in this Manual ServSwitch Wizard DVI/USB SRXFCC and IC RFI Statements ServSwitch Wizard DVI/USB SRX Table of Contents Compatibility SpecificationsOverview OverviewCable distance rules Desk mount Installation Mounting the modules desk or rackRack mount InstallationConnections at the local module 3.2.1.1 Video connections ConnectionsUSB connections Link connections Audio connections dual-variants only Audio connections ACU5501A-R3 & -R4 onlyPower connections optional Connections at the remote module 3.2.2.1 Video connections Fed from the Upper socket On the local unit Link connections Speaker connections dual variants only Speaker connections ACU5501A-R3 & -R4 onlyOperation Power connectionsVideo display Edid information Operation General useHdmi 1.3a operation Local module Power and activity indicatorsRemote module ServSwitch Wizard DVI/USB SRX Appendices Appendix B. Safety InformationAbout Black Box Black Box Tech Support FREE! Live /7