Xerox SquareFold manual Hints and tips, Printing full-page images on booklets

Page 14

Hints and tips

Printing full-page images on booklets

1.

When using full-page images, ensure that the finished booklet size accommodates any full-page images, and that

2.when the booklet is trimmed, these images are not truncated. Refer to the illustration.

1. This booklet has preprinted front and back covers with a full-page image. It was printed on 8.5 x 14 in./B4 paper. The front cover, which was trimmed, displays the entire image.

2. This same booklet was printed on 8.5 x 11 in./A4 paper. The image on the front cover is truncated after trimming it.

Before you print/copy any booklet job, you should consider your whole job, including the following:

•What is the desired size of the finished booklet?

•Does the booklet contain full-page images?

•Are you using preprinted covers with full-page images?

•Are you trimming the booklet?

•Do you need to shift any full-page images in order to ensure they fit on the finished booklet?

10

SquareFold Trimmer User Guide

Page 13 Page 15
Image 14
Page 13 Page 15
Contents User Guide Page Table of contents Ta b le o f c o n t e n t s Overview SquareFold Trimmer User GuideMain components consist of the following Main componentsOverview Square fold mechanism is found in this areaBooklet to square fold area Paper pathDetects the lead edge spine of booklet and moves Control panel 2a.2bOverview Your requirements for the finished booklet job Square Fold SettingsSquare Fold Settings are found on the SquareFold Page Trimmer Mode Settings Lbs./g/m² Setting mm Hints and tips Printing full-page images on bookletsFollow these tips Problem solving Jam clearanceProblem solving Fault Codes Close the SquareFold Trimmer Module Top Left and Right Has a fault Possible cause Recommended solution Weight Lb kg Technical dataSpecifications .8 mm height
Top Page Image Contents