Xerox SquareFold manual Overview, Main components consist of the following, Scraps

Page 6

Overview

Identifying the components

Main components

 

 

The main components consist of the following:

1.

 

 

2.

1.

Top Left Cover: Open this cover to remove paper jams. The

 

square fold mechanism is found in this area.

 

 

3.

2.Top Right Cover: Open this cover to remove paper jams. The trimming mechanism is found in this area.

4.

Important!: The top covers cannot be opened during normal operation or when the machine is idle. The covers can be

5.opened only when an indicator is lit (refer to page 4) and a jam/fault occurs within the SquareFold Trimmer Module.

3.Control Panel: The Control Panel consists of a mimic display, buttons, and various indicator lights. The control panel is

discussed in more detail on page 4.

4.Booklet Output Tray: This tray receives square-fold booklet output from the finisher.

5.Trimmer Waste Container: Collects scrap/waste from the trimmer. Pull open to remove and dispose of trimmer waste

scraps.

2

SquareFold Trimmer User Guide

Page 5 Page 7
Image 6
Page 5 Page 7
Contents User Guide Page Table of contents Ta b le o f c o n t e n t s Overview SquareFold Trimmer User GuideMain components consist of the following Main componentsOverview Square fold mechanism is found in this areaPaper path Detects the lead edge spine of booklet and movesBooklet to square fold area Control panel 2a.2bOverview Square Fold Settings Square Fold Settings are found on the SquareFoldYour requirements for the finished booklet job Page Trimmer Mode Settings Lbs./g/m² Setting mm Hints and tips Printing full-page images on bookletsFollow these tips Problem solving Jam clearanceProblem solving Fault Codes Close the SquareFold Trimmer Module Top Left and Right Has a fault Possible cause Recommended solution Weight Lb kg Technical dataSpecifications .8 mm height
Top Page Image Contents