Xerox SquareFold manual Overview

Page 9

Overview

2c.

2d.

Up/down buttons: Press the up or down button to adjust the Trimmer Mode setting; refer to 2d.

Trimmer Mode Setting: This displays the trimmer setting in millimeters. The trimmer setting is based on the final output booklet size and is adjustable. This is discussed in more detail on page 8.

3.Square Fold functions: This area of the control panel contains the following:

3a. Square Fold power indicator: This lights when the Square Fold Mode is on.

3b. Square Fold on/off button: Press this button to switch on or off the Square Fold Mode.

3c. Settings button: Press this button to adjust the Square Fold setting; refer to 3d.

3d. Square Fold Setting: Select the desired setting; these settings are discussed in more detail on page 6.

SquareFold Trimmer User Guide

5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents User Guide Page Table of contents Ta b le o f c o n t e n t s SquareFold Trimmer User Guide OverviewOverview Main componentsMain components consist of the following Square fold mechanism is found in this areaPaper path Detects the lead edge spine of booklet and movesBooklet to square fold area 2a.2b Control panelOverview Square Fold Settings Square Fold Settings are found on the SquareFoldYour requirements for the finished booklet job Page Trimmer Mode Settings Lbs./g/m² Setting mm Printing full-page images on booklets Hints and tipsFollow these tips Jam clearance Problem solvingProblem solving Fault Codes Close the SquareFold Trimmer Module Top Left and Right Has a fault Possible cause Recommended solution Specifications Technical dataWeight Lb kg .8 mm height
Top Page Image Contents