Overview
Control panel
1.
1b.
1c.
1a.
1d.
2.
2a.2b.
2d.
2c.
3.
3a.
3b.
3c.
3d.
The Control Panel consists of the following:
1.Fault indicators: These indicators light when a fault or jam occurs in either a particular area of the SquareFold Trimmer Module or in the finisher:
1a. This indicator lights when a jam occurs as the booklet is leaving the exit area of the finisher.
1b. This indicator lights when a jam occurs in the square fold area.
1c. This indicator lights when a jam occurs in the trimmer area.
Tip: If one of these indicators (1a, 1b, 1c) is lit, the top covers can be opened, and the jam/fault cleared; otherwise, during normal operation or when the machine is idle, the top covers cannot be opened. For information on jam/fault clearance, refer to page 12.
1d. This indicator lights when the Trimmer Waste Container is pulled out or when it is full.
2.Trimmer functions: This area of the control panel contains the following:
2a.
2b.
Trimmer power indicator: This lights when the Trimmer Mode is on.
Trimmer on/off button: Press this button to switch on/off the Trimmer Mode.
4 | SquareFold Trimmer User Guide |