Xerox SquareFold manual Possible cause Recommended solution

Page 21

				Problem solving

	Fault code	Possible cause		Recommended solution

	012 115	Finisher jam/fault	1.	If machine’s UI continues to reflect a fault/jam, open the
	012 264			finisher and remove any jams.
	012 302
				• Close the finisher cover(s).
			2.	Follow the instructions shown on the machine’s UI to
				resume printing/copying.
			3.	If necessary, power off/on the copier/printer.
			4.	If fault persists, call for service.

SquareFold Trimmer User Guide

17

Image 21

Contents User Guide Page Table of contents Ta b le o f c o n t e n t s SquareFold Trimmer User Guide OverviewOverview Main componentsMain components consist of the following Square fold mechanism is found in this areaPaper path Detects the lead edge spine of booklet and movesBooklet to square fold area 2a.2b Control panelOverview Square Fold Settings Square Fold Settings are found on the SquareFoldYour requirements for the finished booklet job Page Trimmer Mode Settings Lbs./g/m² Setting mm Printing full-page images on booklets Hints and tipsFollow these tips Jam clearance Problem solvingProblem solving Fault Codes Close the SquareFold Trimmer Module Top Left and Right Has a fault Possible cause Recommended solution Specifications Technical dataWeight Lb kg .8 mm height