Xerox Phaser 2135 manual Maintenance Safety

Page 10

■If any of the following conditions occur, switch off the printer power immediately, disconnect the power cord, and call an authorized service representative.

■The power cord is damaged or frayed.

■Liquid is spilled into the printer.

■The printer is exposed to water.

■Any part of the printer is damaged.

Maintenance Safety

■Do not attempt any maintenance procedure that is not specifically described in the documentation supplied with your printer.

■Do not use aerosol cleaners. The use of supplies that are not approved may cause poor performance and could create a dangerous condition.

■Do not remove the covers or guards that are fastened with screws unless you are installing optional equipment and are specifically instructed to do so. Power should be OFF when performing these installations. Except for user installable options, there are no parts that you can maintain or service behind these covers.

Operational Safety

Your printer and supplies were designed and tested to meet strict safety requirements. These include safety agency examination, approval, and compliance with established environmental standards.

Your attention to the following safety guidelines will help to ensure the continued safe operation of your printer.

■Use the material and supplies specifically designed for your printer. The use of unsuitable materials may result in poor performance and possibly a hazardous situation.

■Follow all warnings and instructions marked on, or supplied with, the printer, options and supplies.

■Place the printer in a dust free area where the temperature range is 50 degrees F to 90 degrees F (10 degrees C to 32 degrees C) and the relative humidity is 10 percent to 85 percent.

■Place the printer in an area where there is adequate space for ventilation, operation and servicing. The recommended minimal spacing is 90 cm (36 in.) in front of and above the printer, 60 cm (24 in.) behind the printer, and 30 cm (12 in.) on each side of the printer. Do not block or cover the slots and openings on the printer. Without adequate ventilation, the printer may overheat.

■For optimum performance, use the printer at elevations below 2,000 meters (6,560 ft.). Performance may diminish at elevations between 2,000 meters (6,560 ft.) and 3,000 meters (9,840 ft.). Use at elevations above 3,000 meters (9,840 ft.) exceeds operability limits.

■Do not place the printer near a heat source.

■Do not place the printer in direct sunlight.

■Do not place the printer in line with the cold air flow from an air conditioning system.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents L O R P R I N T E R Page Phaser 2135 Color Printer User Guide Page Page Warranty Printer WarrantyConsumables Warranty Page User safety summary Electrical SafetyMaintenance Safety 68 kg 149 lbs Do not switch off the printer power while printing Symbols as marked on product Page Contents Xiv Xerox Supplies and Accessories Standard Toner Cartridges Customer-Replaceable Consumables CRCsHigh-Capacity Toner Cartridges Part NumberImaging Drums Imaging Drum Rainbow PackTransfer Belt FuserTransfer Belt 016-1927-00 Supplies Xerox Phaser Professional Printing PaperCustomer Replaceable Units CRUs Universal Tray Paper Cassette OnlyXerox Phaser Transparency Sleeves and Pockets Xerox Phaser Professional Printing Paper contdXerox Phaser 35 Series Transparency Film Xerox Phaser Color Laser LabelsXerox Phaser Premium Business Cards Cleaning KitInternal Hard Drive AccessoriesFeature Part Number Automatic Duplex UnitAdditional Memory Lower Tray AssemblyLower Tray Deck Front Panel Usage Front Panel LayoutBasic Menu Navigation Menu NamePrinting the Menu Map Standard Print ModesEnhanced Color Mode Color ModesProcess Grayscale Phosphor settingsBlack Overprint Unspecified RGBPaper Tips User Guide Supported page sizes and print area Supported page sizes and print areaSupported page sizes and print area cont’d Universal Tray Paper SpecificsSupported Media Supported Media CapacityTransparency Specifics Universal Tray Loading Tray 1, 2, 3, 4, or 0748-25 Long-Edge Feed LEF Media Type Weight Multi-Sheet Bypass Feeder MBF Media SpecificsSupported Media contd Loading the Multi-Sheet Bypass Feeder MBF Insert the media and adjust the guide for the media width Media Type Options Weight Xerox Phaser 35 Series Transparencies Envelopes Guidelines for envelope printing0748-33 0748-34 Automatic 2-Sided Printing From the Paper Tray Re-insert the Universal Tray Short-Edge binding or Flip on short edge Manual 2-Sided Printing Printing Side Top of the page should be toward the right of the tray From the MBF Multi-Sheet Bypass Feeder Media Type Options for Weight Sided Printing 0748-45 Top of the page should be toward the left of the tray Adjust the width and length guides to match the paper size Media Type Options for Weight Sided Printing Troubleshooting Print Quality Problems Print Defects and Potential Remedies Print Quality Problem Common Causes Potential RemediesOnly one color, an imaging drum may Print Defects and Potential Remedies contd Only one color, anBack-Side Contamination Color Misregistration Preventing media jams Clearing Media JamsWhat causes a media jam? Clearing Media Jams Top Cover Jam Open the top cover. Avoid touching or handling the LED bars0748-58 Remove the jammed media from the transfer belt area Replace the toner cartridges/imaging drum assemblies Right Door Jam Duplex Unit JamTray Misfeed Front Panel Getting HelpPrinter CD-ROM InfoSMART Knowledge Base Xerox web siteColor Connection To find a local reseller Other on-line servicesCanada Outside U.S. Customer Support Center AseanProduct Use Xerox Phaser 2135 Color Printers SpecificationsMaterial Safety Data Sheets Color Toner Cartridges Ingredients percent by weight CAS numberImmediate Effects Chronic Effects None knownPhysical and Chemical Properties Ecological Information Material Safety Data Sheets CleanTex Alcopad Product IdentificationEvaporation Rate Butyl ACETATE-1 Vapor Density AIR = 1 Sara Title III Reporting Other Information Ingredients CAS number Ethyl alcohol 64-17-5 Material Safety Data Sheets LED Lens CleanerChronic Effects First AID Measures Not available Other Information Index Phaser 2135 Color Printer User Guide Phaser 2135 Color Printer Page Printed on recycled paper
Top Page Image Contents