Automatic 2-Sided Printing From the Paper Tray
Automatic 2-sided printing is available from all trays; it is not available from the Multi-Sheet Bypass Feeder. To use automatic
2-sided printing, the duplex option must be installed in the printer. For best results with 2-sided printing, use 90 g/m2 (24 lb. bond) laser paper.
Automatic 2-sided printing is available for all paper sizes except A6. Use only plain paper or heavy paper. Paper weight must be between 75-120 g/m2 (20-32 lb. bond).
Note
See Manual 2-Sided Printing (page 39) for information about duplexing heavier paper weights.
For best results with automatic 2-sided printing, do not use heavy toner coverage on the even-numbered pages of your print job.
Caution
Use only laser bond paper for automatic 2-sided printing in the Universal Tray. Do not use any specialty media (such as glossy coated paper) to print automatic 2-sided printing.
Damage caused by using unsupported media for 2-sided printing is not covered by the printer’s warranty.
■Load 75-120 g/m2 (20-32 lb. bond) paper in the Universal Tray.
■The front side is face-upin the tray.