
Disassembly and Reassembly
3.11 Transfer Roller
1.Before you remove the Fuser, you should remove:
-Top Cover(see page 
-LSU(see page 
2.Remove three screws and take the Transfer Earth out.
Transfer  | 
Earth  | 
3.Unplug the PTL Holder Connector, then remove the PTL Holder and PTL Lens, as shown below.
  | PTL  | 
PTL  | Lens  | 
Holder  | 
  | 
4.Unlatch the Bush and remove it. Then lift the Transfer Roller out, as shown below.
Transfer  | 
Roller  | 
Bush  |