TROUBLESHOOTING
Code | Description |
|
|
07Paper Empty Sensor Test :
If activate the Actuator of the PEMPTY Sensor, the left and right of the three LEDs are on.
Paper Empty Sensor ON/OFF | 1st LED ON/OFF |
08Feed & Exit Sensor Test
Test the Feed sensor and Discharge sensor in the same way as '07'.
Feed Sensor ON/OFF | 2nd LED ON/OFF |
Exit Sensor ON/OFF | 3rd LED ON/OFF |
09Cover Open Sensor Test
Test the Cover Open Sensor in th same way as code '07’
Cover Open Sensor ON/OFF | 1st LED ON/OFF |
10Fuser Test
If the [Enter] button pressed, the right LED is on and temperature of the fuser is up to READY Mode. If the [Up] button pressed, the middle LED is on and temperature of the fuser is up to Printing Mode.
If you press the button once more, the left LED is on and temperature of the fuser is up to overheat Mode.
11Hot Burn Test
If the [enter] button pressed, the printer is continuously printing without detection. Turn the power off to stop operation.
12Cleaning Mode Print Mode
Print the paper to clean the OPC Drum in the Cartridge.
13THV(+) TRIGGER. ALL HV :
All high voltage output by each HV terminal and LSU and the fan is in operation. In this mode, electronic resistance of transfer roller and high voltage is detected.
14PTL Test :
Indicates the function of the PTL, same method of the code ‘07’.
15Fan Test :
Indicates the function of the Fan, same method of the code ‘07’.
16Manual Pickup Test :
Indicates the function of th Manual Pickup, same method of the code ‘07’.
17Manual Sensor Test :
Indicates the function of the Manual Sensor, same method of the code ‘07’.