
TROUBLESHOOTING
4.2.11 Ghost (3)
•Description White ghost occurs in the black image printing at 32mm intervals.
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
37mm
Check and Cause |
| Solution |
|
|
|
1. The life of the developer may be expired. | 1. | Occur in the developer cartridge, replace |
|
| the developer and try to print out. |
2. The abnormal voltage and bad contact of | 2. | Check the approved voltage of the supply |
the terminal of the supply roller |
| roller and contact of the terminal and adjust |
|
| if necessary. |
|
|
|
4.2.12 Ghost (4)
•Description Ghost occurs at 47 mm intervals.
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
Digital Printer
47mm
Check and Cause |
| Solution |
|
| |
The temperature of the fuser is maintained | 1. Disassemble the fuser and remove the | |
high. | contaminated toner particles on the roller | |
| and clean the foreign matter between | |
| Thermistor and Heat roller. | |
| ( | Caution : can be deformed) |
|
|
|
4.2.13 Satins on the Face of Page
•Description The background on the face of the printed page is stained.
Digital
Printer
DigitalPrinter
DigitalPrinter
DigitalPrinter
DigitalPrinter
Check and Cause |
| Solution |
|
|
|
1. Toner leakage due to improperly sealed | 1. | Replace the developer cartridge. |
developer. |
|
|
2. If the transfer roller is contaminated, satins | 2. | If the transfer roller is contaminated, run PC |
on the face of page will occur. |
| Cleaning Mode Print 2 or 3 times. |
|
| And perform |
|
| remove contamination. |
|
|
|
Service Manual