Xerox 4650, 4450 manual Sample .FSL, Placing a graphic, Syntax Begin Section id, END Section

Page 41

FORMS DESCRIPTION LANGUAGE

n/d

Specifies the reference scale factor. Each parameter, n and d, must be an integer in the range of 1 to 8 to allow a reference scale factor in the range of 1/8 to 8. The reference scale factor is multiplied by that specified at the time the graphic was digitized, and the product is rounded to the nearest integer in the range of 1 to 8. That integer becomes the effective scale factor with which the graphic is imaged.

Default

 

If no unit is specified, grid unit dimensions are used as the

 

 

default.

 

Example

 

GRAPHIC AFJ AT 10, 12;

Sample .FSL

 

A GRAPHIC command is illustrated in figure 2-6.

 

 

Figure 2-6.

Placing a graphic

 

 

 

 

 

AT 31.6,31.6 DRAW BOX 46.8 WIDE BY 21.8 HIGH

 

 

USING SOLID 2;

 

 

AT 31.9, 31.9 DRAW BOX 46.2 WIDE BY 21.2 HIGH

 

 

USING SOLID 2;

 

 

AT 32.2,32.2 DRAW BOX 45.6 WIDE BY 20.6 HIGH

 

 

USING SOLID 2;

 

 

GRAPHIC UNICRN AT 31.5,42;

 

 

TEXT USING FONT 1 AT 83.5,2.5©FORM SM105©;

 

 

 

 

 

 

 

Considerations

 

Up to 16 images per page are permitted. The Raster Image

 

 

Processor (RIP), Interpress, and graphics capability (GVG2),

 

 

enable the printing of more than 16 images per page as well as

 

 

vector graphics.

 

 

 

SECTION

 

 

 

 

 

When a form consists of several identical sections, you can save

 

 

time by defining only one section and treating it as a module,

 

 

that is, having it repeated at desired locations.

Syntax

 

BEGIN SECTION id;

 

 

or

 

 

 

DO SECTION id AT y unit x unit;

 

 

END SECTION;

Parameter options

 

id

 

 

 

An identifier (one to six characters) that is invoked when a

 

 

section is to be defined.

y

Coordinate of the origin on the y axis of the section in relation to the origin of the form.

unit

Unit of linear measurement, expressed as inches (IN), centimeters (CM), or DOTS. If units are not specified, the measurement is in grid units.

XEROX 4050/4090/4450/4650 LPS FORMS CREATION GUIDE

2-19

Image 41
Contents Xerox Page Table of contents Compiling and printing forms TroubleshootingGrid Font Line BOX Text Logo Graphic Section Comment ENDGlossary AppendicesIndex GLOSSARY-1Page Uppercase Bold Blue IntroductionLowercase black italics UppercasePublication Number Related publicationsLPS Advantages of FDLFonts OrientationCharacter spacing/line length examples Image size considerations PaperFont memory SystemVirtual PhysicalPhysical page sizes Inches MillimetersVirtual page origin EdgemarkingNon-imaged elements Imaging error messagesRegistration shift and skew Landscape orientation shift and skew 11 x Patient Name Output performance considerationsForm origin Form elements and corresponding origins Positioning form elementsForm element Text block originY coordinates GridsPredefined formats Data type Description Data typesData types Forms Description Language FDL command overviewCommand format Command types Commands Command function Command summaryFDL command summary Form Paper LANDSCAPE/PORTRAIT Grid Font Setup commandsForm creation process FORM/RESOLUTION Paper Size is value PaperParameter options Unit by y unitOrientation LANDSCAPE/PORTRAITOrientation page Size is n Wide by m High Grid Unit is format id Origin y unit x unit GridGrid Unit is value Origin y unit x unit Format idFonts UN106A,UN104C,UN114A FontFonts id 1 id 2 id 3...id 32j · Line · BOX · Text AT · Text in BOX · Logo · Graphic Description commandsDirection LineDirection AT c a unit c a unit ... Every c i unit BOX Density ThicknessText AT Text#ETAIL #D#ISTRIBUTION Text in BOX Using Font n in position BOX y unit x unit `text `textNext direction BOX `text `text PositionNext Horizontal BOX `text `text Text positioningLogo id AT y unit x unit LogoEagle GraphicGraphic name AT vpos unit hpos unit Scale is n/d VposPlacing a graphic Sample .FSLSyntax Begin Section id Do Section id AT y unit x unitBegin Section Phone Default NoneBegin Section PhoneSyntax Comment text CommentDo Section Phone AT 0,0 Do Section Phone AT 30,37 Endend Syntax END Parameters None Default NoneEND Form printing process Compiling and printing formsFSL data transfer OfflineOnline Compiling a formFDL compilation time Invoking the forms compilerCompiling 4850 color forms and logos RES=spiCompiling 600 spi forms Error checks Using the compilation optionsSummary sheet FDL Tryit SimplexProof File storageFDL filename Proof Secured filesExample 1 FDL Tryit Tray Printing a compiled formSample filename.FRM Sample TRYIT.FRMSuggested coding techniques TroubleshootingConverting preprinted forms Designing new formsForms Paper size Recommended coding sequenceSyntax ambiguities Keywords Hints and tips Hints and tipsHints and tips Hints and tips Keywords Image complexity factorsLine tables Example of extraneous drawn lines Importance of orderly constructionLines entered in unintended locations Scan line densityPortrait pages Determining line density limitationsLandscape pages Superimposed lines Generation errorsLocal density and page setup errors Solid 2 box sharing part of a Solid 1 box edge Using boxesLocating the closest box Error calculationsText in boxes Centering text in boxes Correcting text-in-box errorsText Spaced AT 4 Dots in BOX 10 `TEXT Line Shading factorsSection factors Terminating shading to avoid line density problemsConverting other unit values to dots AT 8 Draw VER Line from 4 to 5 Using HairlineRounding measurement factors Rounding variable data Grid unit specification System response Grid unit scaling specificationsFDL statistics Grid unit scalingSyntax Meaning FDL command syntax summaryFDL command syntax conventions END Compiling commands syntaxSystem default summary Inch/A4 paper Specification SubstitutionGrid and origin substitutions for 8.27 by Grid and origin substitutions for all paper sizes Page Figure C-1.Earnings register Sample form creationUsing the Comment command Writing the setup commandsDrawing lines Vertical Line commandDrawing horizontal lines Drawing vertical linesPlacing text at a location Drawing boxesPlacing text in a box Using the END commandEdit 1STFRM.FSL Compiling the formFigure C-12.Source statement 1STFRM.FSL Page Maximum FDL capacity limitsCapacity limits Page Format ID No. Lpi Cpi Point Size Standard print formatsBegin Lines Columns Size1 Orientation2 Values y,x Font IDPage Forms design ruler Support tools and measurementsStandard formats and spacings Side Formats/spacingSupport Tools and Measurements Grid examples Command examplesForm results with grid specified, but no Size or originGrid Unit is 1 CM Command ExamplesFigure G-5.Form results with grid and page size specified Draw Line examplesFigure G-8.Drawing a horizontal line inches Every BOX examplesFigure G-12. Drawing boxes Shading and Repeat Vertically EveryText AT examples Command Examples Bottom positions Text in BOX examplesCenter positions BCD GlossaryBOF BOTDjde CMEEnet EOTFCP FCBFCU FDLJCL JCBJDE JDLLPS PDL PCCPDE PSC Ucsb TOFUCS XddiFDL SymbolsIndex Image FSLPredefined formats, 1-13, 2-6 to