Adding a Label
1.Click on PRINTER DEFAULTS > PRINTER SETUP > Plot Labels.
2.Click on Help near the top of your screen for details.
Uploading a Stamp to the Printer
1.Click on PRINTER DEFAULTS > PRINTER SETUP > Stamps.
2.Click on Help near the top of your screen for details.
Mismatch Queue
1.Select PRINTER DEFAULTS > PROCESSING DEFAULTS > Media to display the Media page.
2.Enabled Checkbox - Click on this check box to enable/disable mismatch queuing. When a media mismatch occurs, and this box is not checked, the Status column of the Job Queue List will display Mismatch/Blocked, and printing will pause until the necessary medium is installed or the job is cancelled. When a media mismatch occurs, and this box is checked, the Status column of the Job Queue list will display Mismatch/Queued. In this case, pages requiring the missing medium are not printed, but pages requiring media which are currently installed will be printed.
3.Press the Update Printer button.
Media Mismatch Mode
1.Select PRINTER DEFAULTS > PROCESSING DEFAULTS > Media to display the Media page.
2.Click on the Media Specific Settings list box to select a media type.
3.Press the Adjust Settings (Text Form), or Adjust Settings (Graphical UI) button to go to the Media Specific Settings page.
4.Media Mismatch Mode - Select the QUERY mode if you want the printer to prompt the operator at the printer control panel to install the appropriate media size. Select the SUBSTITUTE mode if you want the printer to make media substitutions as necessary to print the page. Select the SCALING mode if you want the printer to automatically scale to the nearest available media size of the same media type.
NOTE: SUBSTITUTE is not a listed selection for the color printers because the selected media is a key component of color print quality.
5. Select the Update Printer button.
Web Print Manager Tool User Guide | Page 15 |