Xerox 701P39116 manual Rendering

Rendering Page

Navigation: PRINTER DEFAULTS > PROCESSING DEFAULTS > Rendering

1.Render Mode - Click on this list box to set the Render Mode for color printers to color or grayscale. For monochrome printers, grayscale is the only valid option.

2.Print Quality Mode - In general, the more bi-directional passes that the printer makes to create the image, the higher quality the output will be, but the longer it will take to produce it. The FAST selection is a single pass bi- directional printing using RACER Technology, NORMAL is 2-pass bi- directional printing, and BEST is 4-pass bi-directional printing.

3.Document Type - Click on this list box to set the Document Type to autoselect, graphics, photo, or lines & text.

4.Contrast - Use this list box to adjust the contrast by specifying an integer from -10 to +10. A value of "0" means that no contrast adjustment is applied. Increasingly negative values reduce the contrast of the rendered image, while increasingly positive values increase the contrast of the rendered image.

5.Lightness - Specify the lightness adjustment in this list box. A value of zero means that no lightness adjustment is applied. Increasingly negative values reduce the lightness of the rendered image, which darkens the image. Increasingly positive values increases the lightness of the rendered image, which further lightens the image.

6.Raster Halftone - This parameter allows the selection of the binarization method used on multibit raster images. The Halftone Screen option offers faster printing than Error Diffusion, but may produce prints with a grainy appearance. The Error Diffusion setting generally produces a smoother print image.

7.Vector Halftone - This parameter sets the method to use when processing halftone images. Select Area Fill for best reproduction of large polygon fills. Select Line Optimized to accentuate fine lines, especially those drawn in filled areas. The factory default setting is Area Fill.

8.Fineline Grayscale Rendering - Select either Contone or Black as the parameter to specify how fine lines should be rendered when the Render Mode is set to Grayscale. In Grayscale Render Mode, fine lines that are drawn in a light luminance color, such as yellow, will appear very light if this parameter is set to Contone. Setting this parameter to Black will cause these lines to appear as black.

9.Fineline Pixel Threshold - This parameter specifies the maximum line width that will be processed as a fine line. The range is 1 - 25.

10.Press the Update Printer button to update the default rendering parameters in the printer.