Configure SLP

ColorQube™ 9201/9202/9203

Network Installation

3.If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].

4.Click on the [Login] button.

5.Click on the [Connectivity] link.

6.Click on the [Protocols] link.

7.Select [Raw TCP/IP Printing] in the directory tree.

8.Ensure the [Enabled] box is checked to enable Raw TCP/IP Printing Protocol.

9.Leave the [TCP Port Number] set to 9100 for Port 1. If two additional ports are available, click [Default All] to see if they set to 9101 and 9102 respectively (emulating HP JetDirect EX Plus 3).

10.Leave the [Bidirectional] checkboxes and [Maximum Connections] settings at their default values.

11.Set the [End of Job Timeout] to the number of seconds to wait before processing a job without an End Of Job indicator.

12.Leave the [PDL Switching] Enabled checkbox at its default value.

13.Click on the [Apply] button to accept the changes or [Undo] to return the settings to their previous values, or [Default All] to enter printer defaults for all settings (recommended).

14.Click on the [OK] button, when you see the window that says “Properties have been successfully modified”.

Note

The settings are not applied until you restart the device.

15.Click on the [Status] tab, select [Description & Alerts] in the directory tree.

16.Click the [Reboot Machine] button and click [OK] to reboot the device. The network controller takes approximately 5 minutes to reboot and network connectivity will be unavailable during this time

Configure SLP (if needed to support CUPS, Mac OS, and NetWare).

1.At your Workstation, open the web browser and enter the IP address of the device in the Address bar, and press [Enter].

2.Click on the [Properties] tab.

3.If prompted, enter the Administrator User ID and Password. The default is [admin] and [1111].

4.Click on the [Login] button.

5.Click on the [Connectivity] link.

6.Click on the [Protocols] link.

7.Select [SLP] in the directory tree.

8.Check the [Enabled] box to enable Service Location Protocol (SLP).

9.Enter an [IP address] for the Directory Agent, if required.

10.Enter the required name(s) for [Scope 1,2,3].

11.Select the Message type from the drop down menu for [Multicast or Broadcast].

12.Enter a value for [Multicast Radius] (0-255).

13.Enter a value for MTU to set the Maximum Transmission Unit (484 - 32768), with 1400 as the default. This allows you to set the maximum packet size for SLP.

14.Click on the [Apply] button to accept the changes or [Undo] to return the settings to their previous values.

Note

The settings are not applied until you restart the device.

System Administrator Guide

5-9

9202, 9201, 9203 specifications

The Xerox 9201, 9202, and 9203 copiers, introduced during the late 1970s and early 1980s, represent a significant leap in office automation technology. These models were part of Xerox's innovative line of copiers, catering to various business needs through their unique features and capabilities.

One of the cornerstone technologies behind the Xerox 9200 series is xerography, a process developed by Chester Carlson in the 1930s. The photocopiers use a dry electrophotographic process, which relies on a photosensitive drum, enabling high-quality and high-speed copying. This technology championed the transition from traditional printing methods to more efficient office practices, revolutionizing how documents were reproduced.

The Xerox 9201 was known for its robust capability to handle a significant volume of copies, appealing primarily to mid-sized organizations. It boasted an impressive speed of up to 80 copies per minute, catering to high-demand settings without compromising the quality of output.

The Xerox 9202 was an enhancement over its predecessor, introducing more advanced features such as automatic document feeding, which significantly reduced manual handling and increased productivity. It also supported various paper sizes, making it versatile for different tasks, from simple memos to full-size reports. Additional capabilities included collating, sorting, and stapling, allowing users to complete comprehensive document preparation in a single pass.

The Xerox 9203 further built upon these advancements, offering even faster copying speeds of up to 100 copies per minute. It also allowed for electronic sorting and featured an integrated mail room solution ideal for larger organizations. The 9203’s user interface was designed for ease of use, paving the way for accessible technology in the workplace.

All three models leveraged advanced optics and imaging technology to ensure sharp, clear reproductions. The capacity for duplex printing was a notable feature, enabling users to print on both sides of the paper, which not only saved resources but also contributed to environmentally friendly practices.

Overall, the Xerox 9200 series exemplified the transition towards multifunctional copiers that incorporated advanced features for efficiency, quality, and ease of use in office environments. Their impact on the industry helped shape modern photocopying, setting the benchmark for future models through their blend of technology and practicality. These machines remain a testament to Xerox's legacy in imaging technology and office automation.