1. | Feeder trays |
This chapter describes the processes for loading paper in the 96/4635/180 IPS feeder trays, and explains what actions are necessary if a paper stock is changed.
Note: The number of feeder trays on your system depends on the number of feeder/stacker modules installed.
Checking feeder trays
Check the amount of paper in each feeder tray by examining the green lights on the door of the tray. Each light represents 25 percent of a ream, or about 125 sheets of
Figure 1-1. Feeder tray lights
•
•
•
You do not have to interrupt a print job to load paper since you can refill one tray while the printer is feeding from another tray.
If you try to load a tray that is currently in use, the feeding switches to a backup tray if one is available. If a backup tray is not available, the printer stops.
The printer does not feed all the paper out of a tray. A stack of approximately 1/4 inch / 6 mm remains in the tray.
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE |