3. | Fuser lubricant |
The fuser on the 96, 4635, and 180 IPS is responsible for fusing the print image to the paper with heat. It is critical that the fuser be kept lubricated with fuser agent and that its reservoir be kept full. This chapter describes the procedure for adding fuser lubricant in the printer.
To add fuser lubricant:
1.Open the right and left doors of the printer and locate the fuser area.
2. Place a dropcloth on the floor under the fuser area.
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE |