FEEDER TRAYS
8.Push the tray in slowly but firmly until it latches. Do not slam the tray closed. This can cause improper latching or machine damage.
9.If the printer stopped due to a low paper condition, press the Continue button on the printer console to resume printing.
Note: When you change the paper size in one of the feeder trays, a message displays asking you to make sure the printer is warmed up, ready, and loaded with the proper media. The message displays the media defined for the tray, as well as the paper currently loaded in the tray.
Currently, there is no method of restoring the Input Configuration to its original state. Once you select Modify, the Input Configuration window appears. Make changes on the window as appropriate, then save your changes. For detailed information on the Input Configuration window, refer to your Xerox DocuPrint 96/4635/180 IPS Guide to Configuring and Managing the System.
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE |