Canon D600 manual Windows NT 4.0/2000/XP, Windows 2000/XP Plug and Play

Windows NT 4.0/2000/XP

USB Users

■Windows 2000/XP Plug and Play

Following is the installation procedure of plug and play for “Using USB Port” under Windows 2000.

Before you install the software, make sure you do the following:

•Connect the machine to your computer ( Quick Start Guide).

•Turn on the machine ( Quick Start Guide).

•Start up Windows 2000.

NOTE

Using USB Port (USB Cable)

In order to use the printer via USB, the following requirements need to be satisfied.

•Your computer must be equipped with a USB port and it is necessary that its operation is approved by the manufacturer.

•Windows NT 4.0 is not available for USB.

2

Printing Technology

	.
1	Plug and Play is being carried out and the USB class driver, “USB Printing Support” is
	automatically detected and installed.
2	Log on as member of Administrators. The full control access right for the printer is necessary
	for the installation of the CAPT.

Installing the Canon Advanced

2-9