Xerox D63-069-00 manual System Requirements, Functional Subsystem Spool Converter Requirements

System Requirements

This section describes the prerequisites for operation of the three different product installa- tion options:

•Functional Subsystem Spool File Converter

•idaPSS Program Exit

•Batch program

Common print resource requirements are listed in the last chapter in this section.

Functional Subsystem Spool Converter Requirements

The IDAXFC operates as a functional subsystem initiated as a started task (using a JES, CA-Spool or start printer command).

The load library used by the program requires a minimum of 1 MB. DASD space.

The remainder of the libraries supplied with the idaXFC require approximately 1 MB. DASD space.

The IDAXFC requires a minimum region size of 4MB.

The following products are prerequisites for installing of idaXFC.1

•Operating System

One of the following IBM MVS products is required:

*OS/390

*MVS/ESA

*MVS/XA

•Spool Subsystem.

One of the following spool subsystems is required:

*JES2/JES3 Spool system

*CA-Spool Spool system

idaPSS XES Conversion Exit Requirements

The idaPSS XES Exit requires that idaPSS has already been installed on the system. Only the OS/390 or MVS version of idaPSS may be used to install the idaPSS XES Exit.

1

For details regarding support of specific product versions, refer to related i-datadocumentation.

System Requirements 13