Xerox D63-069-00 XES064I TOO Many MODIFIED, Remainder Skipped, XES067I Modify Command Completed

•XES061I INVALID OPERATOR COMMAND command

Description	An invalid idaXFC operator command was received.
Severity	The command entered is ignored.
Action	Refer to the Operator Controls section in this document for a list of
	valid operator commands.

•XES062W INVALID ORDER RECEIVED IN FSS fssorder

Description	The idaXFC FSI interface received the FSS order "fssorder" that is
	not supported.
Severity	idaXFC order is ignored. Processing continues.
Action	Restart the idaXFC specifying an FSI trace option on the failing
	printer and contact the product distributor.

•XES063I keyword TOKEN TOO LONG

Description	An idaXFC modify keyword exceeded 16 characters.
Severity	Command token is ignored.
Action	Refer to the Operator Controls section in this document for a list of
	valid operator commands and reenter the command if required.

•XES064I TOO MANY MODIFIED, REMAINDER SKIPPED

Description	An excessive number of modify commands could not be accepted.
Severity	The additional modify commands will not be processed.
Action	Refer to the Operator Controls section in this document for a list of
	valid operator commands and reenter the command if required. Up
	to eight modify commands can be entered simultaneously.

•XES066I BLANK MODIFY command

Description	An idaXFC invalid modify command "command" was attempted.
Severity	The operator command is ignored.
Action	Refer to the ida Print Subsystem Product Installation Guide Operator
	Controls section for a list of valid modify commands and reenter the
	command if required.

•XES067I MODIFY COMMAND COMPLETED

Description	The operator entered modify command has been accepted and is in
	effect for the subsequent print job(s).
Severity	Information only message.
Action	None.

A-8 ida XFC Installation Guide