Xerox 701P28020 manual Weekend shutdown, Environmental limits

Page 27

Managing your paper supply

Part number 604K17520

Medium bag kit - 20 medium size plastic bags and instructions for storing 11 x 17 inch (A3) and 12 x 18 inch (A3+) stock

Part number 604K17510

Large bag kit - 20 large plastic bags and instructions for storing oversize stocks up to 14.33 x 20.5 inches (364 x 520 millimeters).

Part number 604K17500

For ease of handling and to minimize handling damage, each bag holds about 2 inches (50 millimeters) of paper.

According to the kit directions, information identifying the stock is written on a heavyweight sheet of paper, which is then wrapped around one side of the stack to act as a protective sleeve. The stock is grasped at the sleeve end and slid into a storage bag. A flap, at the bag opening, is folded snugly over the stack to remove air from the bag. The bagged stock is then flipped over so the weight of the stock will keep the bag closed.

In addition to protecting paper from high and low humidity, the bags reduce or eliminate airborne fibers and debris that typically accumulate on unwrapped paper. Running paper with airborne debris may cause steaks on prints due to press contamination.

Weekend shutdown

The system room environment should be kept within the temperature and relative humidity operating limits, which are identified in Table 2-2.

Table 2-2. Environmental limits

Environmental Condition

Operating Limits

 

 

Temperature range

50° to 90°F

 

10° to 32°C

 

 

Relative humidity range

15% to 85% uncoated

 

paper

 

15% to 85% coated

 

paper

 

 

NOTE: If the environment drifts outside of the operating limits while the press is shut down, image quality will be degraded upon startup and until the environment within the press becomes stabilized. Paper that was left in the paper trays may need to be replaced with fresh paper.

For weekend shutdown:

Shut down the press by following the Powering Off the System procedure in the Xerox Nuvera User Guide and Training Aid online.

Xerox Nuvera Paper Guide

2-5

Image 27
Contents Paper Page Table of Contents Tips by stock type Glossary of paper terms Table of Contents Xerox Nuvera Paper Guide Contents IntroductionAbout this guide Typographical Conventions Related resources Introduction Viii Xerox Nuvera Paper Guide Stock size and weight ranges Selecting stock for your Xerox Nuvera SystemPaper size range Recommended stocks Stock Library and Media Compatibility GuideImage quality performance categories Stocks that should not be run on a Xerox Nuvera System Stocks that should not be usedPaper properties that affect xerographic images Ordering guidelines for paperFinish / Smoothness BrightnessFormation ImpuritiesStock Library coating categories Opacity ShadeElectrical properties and image quality Moisture content Paper properties that affect paper handlingGrain Fold with and against grain Paper weight rangesHangs lower with grain Cut qualityElectrical properties and paper handling Surface strengthPage Checking paper for defects Managing your paper supplyStacking limits Handling paperProblems caused by moisture Paper and moistureControlling moisture in paper Using storage bags for unused paper Environmental limits Weekend shutdownConditioning paper to the printing environment Loading paper into feeder traysPaper conditioning times Stock Loading Label for Trays 1 Determining paper curl Fanning the lead edge Inserter hints and tips Stock namesStock orientation Paper handling Managing your paper supply Xerox Nuvera Paper Guide Tips by stock type Xerox Nuvera MX Special considerationsStock types Tips by stock type Bond 56 to 158 gsm Tips that apply to all stocksBond 56 to 158 gsm All stocksBristol 147 to 220 gsm CarbonlessCover coated 140 to 220 gsm Drilled paper Cover uncoated 106 to 220 gsmDrilled paper Cover uncoated 106 to 220 gsmEnvelopes Heavyweight coated 140 to 220 gsmHeavyweight coated 140 to 220 gsm Envelopes11. Index 130 to 220 gsm Heavyweight uncoated 106 to 220 gsm10. Heavyweight uncoated 106 to 220 gsm Index 130 to 220 gsm12. Labels Lightweight uncoated 56 to 84 gsm13. Lightweight uncoated 56 to 84 gsm Label stock15. Perforated paper Middleweight uncoated 91 to 105 gsm14. Middleweight uncoated 91 to 105 gsm Perforated paper16. Preprinted paper Preprinted paperRecycled paper 16. Preprinted paper17. Recycled paper 19. Synthetic papers and plastics Scored paperSynthetic papers and plastics 18. Scored paper20. Tabs Tabs21. Transparencies Transparencies22. Xerox DocuCard Xerox DocuCardTips by stock type Xerox Nuvera Paper Guide Accessing paper information online About Xerox papersXerox digital stocks For technical information about Xerox paper To order Xerox paperConverting paper weight from pounds to gsm Understanding basic size and basis weightTable A-1. Basic sizes Formula for converting paper weights Table for converting paper weightsTable A-2. Multipliers for converting pounds to gsm Table A-3. Equivalent basis weights of paper Table A-3. Equivalent basis weights of paper Obtaining additional tabs guide kits Printing with tabsTab Optimization Mode Installing the tabs guidePrinting on tabbed stock Define stocks, program, and load feeder traysFor systems with FTM / DS5000 or BFM type finishers For systems with a Multi-Function Finisher MFFCopy stock attributes from one tray to another Feeder proceduresManaging the feed modules Add stock to a tray directly from the Stock Library windowLoad tab stock in a paper tray Load non-tab stock in a paper trayPrevent a tray from feeding Inserter proceduresView a list of paper trays and their settings Select Tray Disable TrayManaging the feed modules Xerox Nuvera Paper Guide Unload stacker cart Finisher proceduresManaging the Finishing Transport Module and Stacker Stacker LimitationsView stacker settings Managing the Stock Library Define a new stockDelete a stock Edit stock attributes Glossary Term Definition Glossary of paper termsGlossary Term Definition Glossary Term Definition Glossary Term Definition Glossary Term Definition Tappi Index Index Xerox Nuvera Paper Guide Index-3 Index Index-4 Xerox Nuvera Paper Guide

701P28020 specifications

The Xerox 701P28020 is a versatile and high-performance printer designed to meet the demands of both small businesses and larger enterprises. This model is a monochrome laser printer, known for its reliability, efficiency, and ease of use, making it a popular choice among users who require quality print outputs.

One of the standout features of the 701P28020 is its exceptional print speed. Capable of delivering up to 45 pages per minute, this printer ensures that high-volume printing jobs are completed quickly, allowing users to maximize productivity. Additionally, it boasts a first-page-out time of less than 6 seconds, minimizing wait times for users who need documents in a hurry.

The printer’s resolution is another key characteristic that enhances its appeal. With a print resolution of up to 1200 x 1200 dpi, the Xerox 701P28020 produces sharp, clear text and detailed graphics, making it suitable for printing everything from business reports to marketing materials. The advanced toner technology used in this model further enhances image quality, ensuring consistent results across various print jobs.

Moreover, the 701P28020 incorporates several modern connectivity options, including USB, Ethernet, and wireless capabilities. This flexibility facilitates seamless integration into any office environment and allows multiple users to access the printer from different devices, enhancing collaboration and efficiency.

A notable aspect of the Xerox 701P28020 is its user-friendly interface. It features an intuitive control panel that simplifies operation, allowing users to navigate through functions with ease. Additionally, the printer is equipped with advanced security features to protect sensitive information, making it a reliable choice for organizations that prioritize data protection.

In terms of maintenance, the 701P28020 has been designed for user convenience. The printer offers automatic duplex printing, reducing paper consumption and overall costs. Furthermore, the long-lasting toner cartridges contribute to lower running costs and less frequent servicing.

Overall, the Xerox 701P28020 is a robust, efficient, and feature-rich monochrome laser printer. With its high-speed performance, excellent print quality, and user-friendly design, it represents an ideal solution for businesses seeking to enhance their printing capabilities while maintaining cost-effectiveness and security.