Xerox 701P28020 manual Tabs

Page 47

Tips by stock type

Tabs

NOTE: A special tabs guide must be installed on the trail edge paper guide before tabs can be loaded and run from a paper tray. Tabs can be run from any tray when the appropriate guide is installed. Refer to Appendix B, Printing with tabs, for more information.

 

Table 3-20. Tabs

 

 

Description

Tabs are cover weight sheets that are slightly longer in one dimension than

 

normal size sheets and are used to mark off sections. Pre-cut tabs are

 

stamped to remove all but a small tab, typically come in sets of three or five,

 

and are arranged in a particular order. Full cut tabs have a larger, uniform

 

section that protrudes beyond the standard sized sheets and are not

 

arranged in a particular order.

 

 

Selection tips

• Refer to the Drilled paper section if tabs have pre-punched holes to

 

ensure hole pattern is acceptable.

 

• Tabs with a sequence of 1 to 31 can be run.

 

 

Storage tips

Follow general guidelines in Chapter 2, Managing your paper supply.

 

 

Usage tips

• Pre-cut tabs must be loaded in paper trays for long edge feed.

 

• Only use single straight (forward) collated tabs with the DS5000 stacker.

 

The job should be programmed with 1-N order and face down delivery.

 

• A5/5.5” tabs can not be run to the stacker due to the stacker size

 

limitation. These tabs can only be programmed to the top tray.

 

• When loading pre-cut tabs, the tab side of the sheets must be on the trail

 

edge. Refer to the label in the paper tray.

 

• When running tab stock with coated or laminated tabs, limit the stacks in

 

feeder trays to 200 sheets to prevent jamming. If jamming occurs,

 

reduce the number of sheets to 50.

 

 

Xerox Nuvera Paper Guide

3-13

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Paper Page Table of Contents Tips by stock type Glossary of paper terms Table of Contents Xerox Nuvera Paper Guide About this guide ContentsIntroduction Typographical Conventions Related resources Introduction Viii Xerox Nuvera Paper Guide Paper size range Stock size and weight rangesSelecting stock for your Xerox Nuvera System Image quality performance categories Recommended stocksStock Library and Media Compatibility Guide Stocks that should not be run on a Xerox Nuvera System Stocks that should not be usedPaper properties that affect xerographic images Ordering guidelines for paperFinish / Smoothness BrightnessStock Library coating categories FormationImpurities Electrical properties and image quality OpacityShade Grain Moisture contentPaper properties that affect paper handling Fold with and against grain Paper weight rangesHangs lower with grain Cut qualityElectrical properties and paper handling Surface strengthPage Checking paper for defects Managing your paper supplyStacking limits Handling paperControlling moisture in paper Problems caused by moisturePaper and moisture Using storage bags for unused paper Environmental limits Weekend shutdownPaper conditioning times Conditioning paper to the printing environmentLoading paper into feeder trays Stock Loading Label for Trays 1 Determining paper curl Fanning the lead edge Stock orientation Inserter hints and tipsStock names Paper handling Managing your paper supply Xerox Nuvera Paper Guide Stock types Tips by stock typeXerox Nuvera MX Special considerations Tips by stock type Bond 56 to 158 gsm Tips that apply to all stocksBond 56 to 158 gsm All stocksCover coated 140 to 220 gsm Bristol 147 to 220 gsmCarbonless Drilled paper Cover uncoated 106 to 220 gsmDrilled paper Cover uncoated 106 to 220 gsmEnvelopes Heavyweight coated 140 to 220 gsmHeavyweight coated 140 to 220 gsm Envelopes11. Index 130 to 220 gsm Heavyweight uncoated 106 to 220 gsm10. Heavyweight uncoated 106 to 220 gsm Index 130 to 220 gsm12. Labels Lightweight uncoated 56 to 84 gsm13. Lightweight uncoated 56 to 84 gsm Label stock15. Perforated paper Middleweight uncoated 91 to 105 gsm14. Middleweight uncoated 91 to 105 gsm Perforated paper16. Preprinted paper Preprinted paper17. Recycled paper Recycled paper16. Preprinted paper 19. Synthetic papers and plastics Scored paperSynthetic papers and plastics 18. Scored paper20. Tabs Tabs21. Transparencies Transparencies22. Xerox DocuCard Xerox DocuCardTips by stock type Xerox Nuvera Paper Guide Xerox digital stocks Accessing paper information onlineAbout Xerox papers For technical information about Xerox paper To order Xerox paperTable A-1. Basic sizes Converting paper weight from pounds to gsmUnderstanding basic size and basis weight Table A-2. Multipliers for converting pounds to gsm Formula for converting paper weightsTable for converting paper weights Table A-3. Equivalent basis weights of paper Table A-3. Equivalent basis weights of paper Obtaining additional tabs guide kits Printing with tabsTab Optimization Mode Installing the tabs guidePrinting on tabbed stock Define stocks, program, and load feeder traysFor systems with FTM / DS5000 or BFM type finishers For systems with a Multi-Function Finisher MFFCopy stock attributes from one tray to another Feeder proceduresManaging the feed modules Add stock to a tray directly from the Stock Library windowLoad tab stock in a paper tray Load non-tab stock in a paper trayPrevent a tray from feeding Inserter proceduresView a list of paper trays and their settings Select Tray Disable TrayManaging the feed modules Xerox Nuvera Paper Guide Unload stacker cart Finisher proceduresManaging the Finishing Transport Module and Stacker Stacker LimitationsView stacker settings Delete a stock Managing the Stock LibraryDefine a new stock Edit stock attributes Glossary Term Definition Glossary of paper termsGlossary Term Definition Glossary Term Definition Glossary Term Definition Glossary Term Definition Tappi Index Index Xerox Nuvera Paper Guide Index-3 Index Index-4 Xerox Nuvera Paper Guide

701P28020 specifications

The Xerox 701P28020 is a versatile and high-performance printer designed to meet the demands of both small businesses and larger enterprises. This model is a monochrome laser printer, known for its reliability, efficiency, and ease of use, making it a popular choice among users who require quality print outputs.

One of the standout features of the 701P28020 is its exceptional print speed. Capable of delivering up to 45 pages per minute, this printer ensures that high-volume printing jobs are completed quickly, allowing users to maximize productivity. Additionally, it boasts a first-page-out time of less than 6 seconds, minimizing wait times for users who need documents in a hurry.

The printer’s resolution is another key characteristic that enhances its appeal. With a print resolution of up to 1200 x 1200 dpi, the Xerox 701P28020 produces sharp, clear text and detailed graphics, making it suitable for printing everything from business reports to marketing materials. The advanced toner technology used in this model further enhances image quality, ensuring consistent results across various print jobs.

Moreover, the 701P28020 incorporates several modern connectivity options, including USB, Ethernet, and wireless capabilities. This flexibility facilitates seamless integration into any office environment and allows multiple users to access the printer from different devices, enhancing collaboration and efficiency.

A notable aspect of the Xerox 701P28020 is its user-friendly interface. It features an intuitive control panel that simplifies operation, allowing users to navigate through functions with ease. Additionally, the printer is equipped with advanced security features to protect sensitive information, making it a reliable choice for organizations that prioritize data protection.

In terms of maintenance, the 701P28020 has been designed for user convenience. The printer offers automatic duplex printing, reducing paper consumption and overall costs. Furthermore, the long-lasting toner cartridges contribute to lower running costs and less frequent servicing.

Overall, the Xerox 701P28020 is a robust, efficient, and feature-rich monochrome laser printer. With its high-speed performance, excellent print quality, and user-friendly design, it represents an ideal solution for businesses seeking to enhance their printing capabilities while maintaining cost-effectiveness and security.
Top Page Image Contents