Belkin F1DA208Z manual Getting Started, Connecting the Primary and Secondary KVM Switches Step

Page 19

Installation

Getting Started:

Step 1

Make sure that all servers and PRO3 Dual-User KVM Switches are powered off.

Step 2

Place all primary and secondary KVM switches in the desired location.

Step 3

Connect the console monitor, keyboard, and mouse to the console ports of the primary switch (BANK 00). Refer to “Connecting the Console to the PRO3 KVM Switch” on page 9.

Connecting the Primary and Secondary KVM Switches:

Step 1

Using the Daisy-Chain Cable (F1D109-XX), connect one end to the “Daisy-Chain In” port on the primary KVM switch (BANK 00).

Step 2

Connect the other end of the Daisy-Chain Cable (F1D109-XX) to the “Daisy-Chain Out” port of the first secondary KVM switch (BANK 01).

Step 3

To add secondary units, connect one end of the Daisy-Chain Cable (F1D109-XX) to the “Daisy-Chain In” port on the first secondary KVM switch and the other end to the “Daisy-Chain Out” port of the next secondary KVM switch (for example, BANK 01).

Step 4

Repeat Step 3 for additional PRO3 KVM Switches you wish to daisy-chain together.

1

2

3

4

5

6

7

8

section

17

Image 19

Contents OmniView PRO3 Dual-User KVM Switch Table of Contents Introduction Package ContentsOverview Feature OverviewEquipment Requirements OverviewCables Mice System RequirementsOS Platforms KeyboardsFront View of the PRO3 KVM Switch Unit Display DiagramsBack View of the PRO3 KVM Switch Specifications Cable-Distance Requirements For PS/2 Servers InstallationPre-Configuration Where to Place the PRO3 KVM SwitchMounting the PRO3 KVM Switch InstallationBracket Installation Connecting the Console to the PRO3 KVM Switch US power adapter shown Connecting Servers to the PRO3 KVM Switch PS/2 Connection Power up your server Connecting Servers to the PRO3 KVM Switch USB Connection Step Connecting Multiple PRO3 KVM Switches Daisy-Chaining How Bank Addresses are Assigned Example of Daisy-Chain ConfigurationExample Getting Started Connecting the Primary and Secondary KVM Switches StepConnecting the Servers Powering Up the Systems Selecting a Server or Bank Using Hot-Key Commands Using your PRO3 KVM SwitchUsing your PRO3 KVM Switch AutoScan Mode Main OSD OSD Keyboard CommandsMain Menu Main-Menu-Page Keyboard CommandsMain Menu page allows you to Language User SettingPort Name Edit User name admin Password belkin Access ListUser Name Password Hot Key AutoScan Time Keyboard Hot-Key-Command ShortcutsSun Combo and Mac Key Mapping Updating Firmware To update the firmware, you will need the following itemsFrequently Asked Questions Frequently Asked Questions Am getting a black screen on my monitor TroubleshootingServer boots up, but the mouse does not work TroubleshootingMouse is lost when I switch to a different port Mouse is not detected at boot upUSB Glossary Glossary What the period of coverage is InformationFCC Statement CE Declaration of ConformityWhat is not covered by this warranty? What will we do to correct problems?Information How state law relates to the warranty Belkin International, Inc Belkin Tech SupportBelkin B.V