Belkin F1DA208Z manual Specifications

Page 8

Overview

Specifications

Part No.:	F1DA208Z, F1DA216Z
Enclosure:	Metal enclosure with high-impact plastic faceplate
Power:	12V DC, 1A power adapter,
	center-pin-positive polarity
Daisy-Chain:	Maximum of 16 OmniView KVM Switches
No. of Servers
Supported:	8 and 16 respectively for 8- and 16-port models
	(256 servers max. via daisy-chaining)
Monitors Supported:	CRT and LCD (with VGA support)
Max. Resolution:	Up to 1920x1440 @ 75Hz
Keyboard Input:	PS/2 (miniDIN6), USB (Type A)
Mouse Input:	PS/2 (miniDIN6), USB (Type A)
Monitor Port:	VGA (HDDB15 female)
CPU Ports:	SCSI-50
Daisy-Chain Ports:	SCSI-36 female
Flash-Upgrade Port:	RJ11
Direct Port Selectors:	8 and 16 respectively for 8- and 16-port models
Operating Temp:	32° to 104° F (0~40° C)
Storage Temp:	-4° to 140° F (20~60° C)
Humidity:	0-80% RH, non-condensing
Warranty:	3 years
Dimensions:	(F1DA208Z) 17.25 x 1.75 x 7.5 in.
	(438mm x 44.5mm x 190mm)
	(F1DA216Z) 17.25 x 3.5 x 7.5 in.
	(438mm x 89mm x 190mm)
Weight:	(F1DA208Z) 9.2 lbs. (4.2kg.)
	(F1DA216Z) 12.0 lbs. (5.5kg.)

Note: Specifications are subject to change without notice.

1

2

3

4

5

6

7

8

section

6

Image 8

Contents OmniView PRO3 Dual-User KVM Switch Table of Contents Package Contents IntroductionFeature Overview OverviewCables OverviewEquipment Requirements System Requirements OS PlatformsKeyboards MiceBack View of the PRO3 KVM Switch Unit Display DiagramsFront View of the PRO3 KVM Switch Specifications Installation Pre-ConfigurationWhere to Place the PRO3 KVM Switch Cable-Distance Requirements For PS/2 ServersBracket Installation InstallationMounting the PRO3 KVM Switch Connecting the Console to the PRO3 KVM Switch US power adapter shown Connecting Servers to the PRO3 KVM Switch PS/2 Connection Power up your server Connecting Servers to the PRO3 KVM Switch USB Connection Step Connecting Multiple PRO3 KVM Switches Daisy-Chaining Example Example of Daisy-Chain ConfigurationHow Bank Addresses are Assigned Connecting the Primary and Secondary KVM Switches Step Getting StartedConnecting the Servers Powering Up the Systems Using your PRO3 KVM Switch Selecting a Server or Bank Using Hot-Key CommandsUsing your PRO3 KVM Switch AutoScan Mode OSD Keyboard Commands Main OSDMain Menu page allows you to Main-Menu-Page Keyboard CommandsMain Menu Port Name Edit User SettingLanguage User Name Password Access ListUser name admin Password belkin Hot Key Keyboard Hot-Key-Command Shortcuts AutoScan TimeSun Combo and Mac Key Mapping To update the firmware, you will need the following items Updating FirmwareFrequently Asked Questions Frequently Asked Questions Troubleshooting Am getting a black screen on my monitorTroubleshooting Mouse is lost when I switch to a different portMouse is not detected at boot up Server boots up, but the mouse does not workUSB Glossary Glossary Information FCC StatementCE Declaration of Conformity What the period of coverage isInformation What will we do to correct problems?What is not covered by this warranty? How state law relates to the warranty Belkin B.V Belkin Tech SupportBelkin International, Inc