OVERVIEW
The Belkin KVM Switch allows you to control multiple computers with one keyboard, monitor, and mouse. The Switch supports PS/2 input devices (keyboard and mouse), VGA, SVGA, XGA, and PS/2 computers.
Feature Overview
Hot Keys
Hot keys allow you to select ports using designated key commands. Control multiple computers using a simple hot key sequence on your keyboard.
AutoScan
The AutoScan feature allows you to automatically scan and monitor the activities of all operating computers connected to your Switch one by one.
Video Resolution
With a 200MHz bandwidth, the Switch is able to support video resolutions of up to 1920x1440@65Hz. To preserve signal integrity at high resolutions,
Front-Panel Push Button
A push button conveniently located on the face of the Switch allows for simple, manual port selection.
Light-Emitting Diode Display
LEDs on the front of the Switch function as status monitors. Positioned on either side of the
2
P74711ea_F1DJ10x_man.indd
OVERVIEW
Equipment Requirements
Cables
For each PS/2 computer you plan to connect to the Switch, you will need one VGA cable, one PS/2 keyboard cable, and one PS/2 mouse cable. Keyboard and mouse cables must have PS/2
To support resolutions of up to 1920x1440@65Hz and to preserve signal integrity, use of a
Belkin OmniView KVM Cables offer the highest quality possible to ensure that your data is optimally transmitted. KVM Cables include PC99
The following cable kit is included and recommended for your KVM Switch:
OmniView E Series KVM Cable kit (PS/2 Style) |
3
12/11/04 11:35:35 am