Belkin F5D9230-4 user manual Reset Button, Resetting the Router, Restoring the Factory Defaults

Knowing your Router

I.Reset Button

The “Reset” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the “Reset” button. Use the restore option in instances where you may have forgotten your custom password.

(a)Resetting the Router

Push and release the “Reset” button. The lights on the Router will momentarily flash. The “Power/Ready” light will begin to blink. When the “Power/Ready” light becomes solid again, the reset is complete.

(b)Restoring the Factory Defaults

Press and hold the “Reset” button for at least 10 seconds, then release it. The lights on the Router will momentarily flash. The “Power/Ready” light will begin to blink. When the “Power/Ready” light becomes solid again, the restore is complete.

J.Push Button – White

This button is used for the Wi-Fi Protected SetupTM feature. Please refer to the “Changing the Wireless Security Settings” section.

1

2

4	section
3

5

6

7

8

9

10

13