Alternate Setup Method
Table of Contents | sections | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Setting your ISP Connection Type to PPPoE or PPPoA
PPPoE
1.. User Name – Enter the user name.. (Assigned by your ISP).. 2.. Password – Enter your password.. (Assigned by your ISP)..
3.. Retype Password – Confirm the password.. (Assigned by your ISP)..
4.. Service Name (Optional) – A service name is rarely required by an
ISP.. If you are not sure if your ISP requires a service name, leave this blank..
5.. IP assigned by ISP
1) For the Dynamic IP connection – Select “Yes” if your ISP instructed you to use Dynamic IP..
2) For the Static IP connection – Select “No” if your ISP instructed you to use Static IP..
– IP Address – Enter an IP address assigned by your ISP for the Router WAN interface..
N Wireless Modem Router | 32 |