Using the Web-Based Advanced User Interface
Table of Contents | sections | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
4..You will see one more message.. This message tells you that the Router may not respond for as long as one minute as the firmware is loaded into the Router and the Router is rebooted.. Click “OK”..
5..A
Changing System Settings
The “System Settings” page is where you can enter a new administrator password, set the time zone, enable remote management, and turn on and off the NAT function of the Router..
Setting or Changing the Administrator Password
The Router ships with NO password entered.. If you wish to add a password for greater security, you can set a password here.. Write down your password and keep it in a safe place, as you will need it if you need to log into the Router in the future.. It is also recommended that you set a password if you plan to use the remote management feature of your Router..
N Wireless Modem Router | 70 |