3M manual Adjusting the M2256PW Video Display, Choices Description

Page 15

3M™ Multi-touch Display M2256PW User Guide

15

Adjusting the M2256PW Video Display

Your M2256PW Multi-touch Display has four controls to adjust the video display.

Menu – Shows or hides the on screen display menu.

Select -- Highlights the current menu option or saves the current setting. Press ￿ or ￿ to change the value.

￿/Up -- Enables you to scroll forward through items on the menu -- increase the value of selected option or move to the next menu item.

￿/Down -- Enables you to scroll backwards through items on the menu -- decrease the value of selected option or move to the previous menu item.

If you do not press the Menu, Select, or ￿/up or ￿/down adjust buttons for up to 45 seconds, the display adjustment program times out and hides the menu options. You can press the Menu button at any time to display the options again.

Pressing Menu will pull up the On Screen Display (OSD) menu, as shown below.

OSD

Choices

Description

SIGNAL SELECT

Choices are VGA, DVI, or Exit

Selects the applicable input source

VIDEO

Choices are Brightness, Contrast, or Exit

BRIGHTNESS

Selecting the Brightness option will allow you to adjust the brightness of the display. Adjust the brightness using the up and down buttons and press SELECT to confirm the new

3M Touch Systems, Inc. Proprietary Information – 37531 Rev D

Image 15
Contents 3M Touch Systems, Inc. Proprietary Information 37531 Rev D 3M Multi-touch Display M2256PW User Guide Contents Appendix a 3M PX USB Controller Communications Appendix B 3M PX Serial Controller CommunicationsAppendix C Regulatory Information Intended Use Important Safety InformationIntroduction OverviewExplanation of Signal Word Consequences Maintaining Your Touch Display Important Notes3M Touch Systems Support Services Touch Sensor Care and CleaningContact 3M Touch Systems System Requirements Setting up Your M2256PW Multi-touch DisplayCables Included with Your M2256PW Multi-touch Display Unpacking Your Touch DisplayConnecting the Touch Display Testing the M2256PW Multi-touch DisplayArm Mounting Option Supported Video Display Modes and Refresh Rates Using the Standard Controls for the Video CardApplicable Display Mode and Refresh Rate Refresh Rate Hz Video Card RequirementsMenu/Select Down Up Auto/Exit Power LED Configuring the Display SettingsMultimedia Features Access to the Video ControlsChoices Description Adjusting the M2256PW Video DisplayAudio Tools Multitouch Application Support Enabling Your M2256PW Multi-touch DisplayWindows 7 USB Compatibility All Other PlatformsVideo Alignment Installing 3M MicroTouch Software3M Multi-touch Display M2256PW User Guide 3M PX USB Controller Communications Overview of USB Firmware CommunicationsCommunication Basics HID Class Requests Command SetSet Feature Calibration Receiving Reports from the ControllerData Stage Offset Field Size Value Description Calibration Setup Stage Offset Field Size Value DescriptionCalibration Response Command Status Byte Description Determining Target AreasGet Feature GetStatus Setup Stage Offset Field Size Value Description Get Feature GetMaxCountPower On Check Bit Fields Bit Number Description Valid Command Status Field Entries Response DescriptionSet Feature Reset Reset Setup Stage Offset Field Size Value DescriptionReset Data Stage Offset Field Size Value Description Offset Field Size Value Description Set Feature -Restore DefaultsCoordinate Data MultiTouch Digitizer mode Async Report Asynchronous ReportsValue Description Touch Report Structure Offset Field3M PX Serial Controller Communications Overview of Firmware CommandsCommunication Parameters Controller Default SettingsOperating Mode Communicating with the ControllerReceiving Responses from the Controller Sending Commands to the ControllerController Initialization Firmware CommandsSOH Cxcr Command Code DescriptionCalibrate MDUCalibrate Procedure Guidelines for Calibrate CommandGet Copyright Mode Down UpMode Inactive Mode StreamOutput Identity Name CommandNull Command Soft ResetSOH Rdcr Restore DefaultsOperating Parameter Default Unit TypeTouch Data Format Bit DescriptionData Sequence Bits Data Sequence Bits Regulatory Information Regulatory Agency ApprovalsFCC-B CE Conformity for Europe FCC Warning