3M M2256PW manual Explanation of Signal Word Consequences

Page 6

3M Touch Systems, Inc. Proprietary Information – 37531 Rev D

6	3M™ Multi-touch Display M2256PW User Guide

Explanation of Signal Word Consequences

DANGER: Indicates a potentially hazardous situation, which, if not avoided, will result in death or serious injury and/or property damage.

WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury and/or property damage.

CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury and/or property damage.

CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in property damage.

DANGER

To avoid the risk of fire and/or explosion which will result in serious injury or death:

•Do not install or use this product in a hazardous location.

WARNING

To avoid the risk of fire which could result in serious injury or death:

•Do not remove the cover or back of the display.

To avoid the risk of electric shock which could result in serious injury or death:

•Plug power cord into appropriate grounded power source.

•Do not use a damaged power supply.

•Do not use a power cord that is frayed or otherwise damaged.

CAUTION

To avoid the risk of electric shock which may result in minor or moderate injury:

•Do not service the Flat Panel Display yourself. There are no user serviceable parts inside. Refer all servicing to qualified service personnel.

•The backlight inverter output is at high voltage.

•Do not use non-conforming replacement parts.

•Do not place wet or damp objects on the display.

•Do not expose the display to rain or other sources of water, steam, or moisture.

•Do not place foreign objects on the display or its cables.

•Do not remove the cover or back of the display.

•Ensure that connecting the unit to the power source will not overload the power source.

To avoid the risk of glass breakage which may result in minor or moderate injury:

•Handle the display with care to avoid breaking the touch sensor. The display contains glass parts. Dropping the display may cause the glass parts to break.

•Ensure mounting screws are tightened fully to prevent instability.

•Do not place foreign objects on the display.

Image 6

Contents 3M Touch Systems, Inc. Proprietary Information 37531 Rev D 3M Multi-touch Display M2256PW User Guide Contents Appendix a 3M PX USB Controller Communications Appendix B 3M PX Serial Controller CommunicationsAppendix C Regulatory Information Overview Important Safety InformationIntroduction Intended UseExplanation of Signal Word Consequences Important Notes Maintaining Your Touch DisplayTouch Sensor Care and Cleaning 3M Touch Systems Support ServicesContact 3M Touch Systems Setting up Your M2256PW Multi-touch Display System RequirementsUnpacking Your Touch Display Cables Included with Your M2256PW Multi-touch DisplayConnecting the Touch Display Testing the M2256PW Multi-touch DisplayArm Mounting Option Video Card Requirements Using the Standard Controls for the Video CardApplicable Display Mode and Refresh Rate Refresh Rate Hz Supported Video Display Modes and Refresh RatesAccess to the Video Controls Configuring the Display SettingsMultimedia Features Menu/Select Down Up Auto/Exit Power LEDAdjusting the M2256PW Video Display Choices DescriptionAudio Tools All Other Platforms Enabling Your M2256PW Multi-touch DisplayWindows 7 USB Compatibility Multitouch Application SupportInstalling 3M MicroTouch Software Video Alignment3M Multi-touch Display M2256PW User Guide 3M PX USB Controller Communications Overview of USB Firmware CommunicationsCommunication Basics Receiving Reports from the Controller Command SetSet Feature Calibration HID Class RequestsDetermining Target Areas Calibration Setup Stage Offset Field Size Value DescriptionCalibration Response Command Status Byte Description Data Stage Offset Field Size Value DescriptionGet Feature GetStatus Valid Command Status Field Entries Response Description Get Feature GetMaxCountPower On Check Bit Fields Bit Number Description Setup Stage Offset Field Size Value DescriptionSet Feature Reset Reset Setup Stage Offset Field Size Value DescriptionReset Data Stage Offset Field Size Value Description Asynchronous Reports Set Feature -Restore DefaultsCoordinate Data MultiTouch Digitizer mode Async Report Offset Field Size Value DescriptionTouch Report Structure Offset Field Value DescriptionOverview of Firmware Commands 3M PX Serial Controller CommunicationsCommunicating with the Controller Controller Default SettingsOperating Mode Communication ParametersSending Commands to the Controller Receiving Responses from the ControllerFirmware Commands Controller InitializationMDU Command Code DescriptionCalibrate SOH CxcrGuidelines for Calibrate Command Calibrate ProcedureMode Stream Mode Down UpMode Inactive Get CopyrightSoft Reset Name CommandNull Command Output IdentityUnit Type Restore DefaultsOperating Parameter Default SOH RdcrTouch Data Format Bit DescriptionData Sequence Bits Data Sequence Bits Regulatory Information Regulatory Agency ApprovalsFCC-B FCC Warning CE Conformity for Europe