TRENDnet TEW-P1P, TEW-P1U manual Network Print Monitor, Setting Up a Macintosh Computer

Page 51

Setting Up a Macintosh Computer

1.At a Macintosh computer, from the Apple menu, select Chooser.

2.The Chooser window then displays an Apple Zone list. Select the Zone name that you specified when configuring the PRINT SERVER.

Note: If you select a Zone that the PRINT SERVER doesn’t belong to, as you specified in the previous section, no N7119+ will be displayed in the Step 4.

3.If you are using a PostScript printer you can select the LaserWriter 8 icon.

4.The Chooser window then displays PRINT SERVER (s) featuring the support for AppleTalk protocol, along with its default Chooser Name in the right-hand Select A PostScript Printer dialog box.

Note: 1.You may change the default Chooser name and Zone name of a PRINT SERVER by using your web browser before proceeding with this installation. Please see the previous section in this chapter for details.

2.If you use Mac OS 8.x or 9.x, please make sure your printer support PostScript.

5.Click Setup… button and choose the PPD file matching your printer, and click OK. If your printer does not appear in the PPD file list, please contact your printer vendor. You may also use the Generic PPD if you do not need any printer specific features.

6.Close the Chooser Windows.

7.Done.

6. Network Print Monitor

Preparation

The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows 95/98/Me. Please make sure that the following steps have been completed before proceeding with installation under Windows PC.

49

Image 51

Contents Page Page Network Print Monitor Overview Upgrading the Print Server from Psadmin Important Note FCC Radiation Exposure Statement TrademarksCopyright FCC Compliance Notice Radio Frequency NoticeNetwork Management Network configurationWireless Specifications Product OverviewBefore you start, you should prepare Components and Features Wireless Print serverHardware Installation Ad-hoc PEER-to-PEER Mode Wireless Network EnvironmentSupported Networks Configuration Solution TableSetup Operating Function Remarks System PreparationComment Setup Utility for Windows-basedTo install Wizard, please follow the directions listed below Installing the Setup WizardPage Page Page Page Page Page Page Page Using PSAdmin TCP/IP Wizard WizardNetWare Wizard Manual Setup Properties -TCP/IP Options Obtain an IP address from a Dhcp serverSpecify an IP address Upgrade Reset Multiple Print Queues ConfigurationRefresh Procedure Uninstalling the PSAdmin on Windows PCWindows NT/2000/XP/2003 IPP OverviewPage System Requirements HP Web JetAdmin OverviewInstalling HP Web JetAdmin Confirming Installation and Supply AccessConfiguring and Modifying a Device Removing HP Web JetAdmin Utility Using Embedded Web Server OverviewStatus Menu System Status Printer Status Wireless StatusTCP/IP Status Netware Status Snmp Status General SettingsNetWare NDS Setting NetWare Bindery SettingAppleTalk Status Setup Menu Re-type Password System SetupBasic Settings Wireless SetupWEP Settings NetWare Setup Installing Print Server on NetWare 4.x/5.x Installation Procedure Snmp SetupSelect NCF files options Select Edit AUTOEXEC.NCF file System.sysLocation Snmp.snmpEnableAuthenTrapsSystem.sysContact System.sysNameAppleTalk Setup Recommended Network Print Monitor Setting Up a Macintosh ComputerRestart the computer TCP/IP Protocol InstallationNetBEUI Protocol Installation IPX/SPX-compatible Protocol InstallationSelect Printer and Properties Windows 95/98/Me/NT/2000/XP Installation ProcedurePage Basic TCP/IP Installation Overview TCP/IP LPR Port Printing InstallationRun Add Printer Windows NT LPR Port Printing InstallationAssigning an IP Address Use the Network Print Monitor utilityWindows 2000/XP Standard TCP/IP Port Printing Installation Run Add Printer, Click Next Page Page Type tftp Print server‘s IP address Unix InstallationLogin root Type arp -s IP address Print server‘s node ID SCO Unix OpenServerIs xxxx a remote printer or a local printer r/l --------- r SUN SolarisType lpadmin -pprinter-1 -s Print server‘s IP address Type enable printer-1 For example enable printer-1IBM AIX Open Printer Configuration Redhat LinuxSelect Standard Process Click New button Click Forward button Queue Type field, choose Networked Unix Printer field, choose Postscript Printer Printer Connection Type, select On Remote Server UnixWareType tftp -i print server’s IP address put mpsXX.bin Upgrading the print server from PSAdminUpgrading the print server from Unix Through TCP/IP Upgrading the print server from BrowserType tftp print server’s IP address Click Upgrade form Browser and select the firmware file Done General Troubleshooting Overview Power Related ProblemsPrint Port Related Problems Frame Type field, select Ethernet Windows 95/98/Me/NT/2000/XP TroubleshootingMulti-Segment Frame Type 802.2 Installation Select Control PanelPrint Server Reconfiguration Procedure on Windows 95/98/Me Print server Reconfiguration Procedure on Windows NTMoving the print server to a New Segment Novell NetWare Troubleshooting TCP/IP TroubleshootingMoving Your Computer to a New Segment Page Page Appendix Diagnostic ModeLoad Default Value Frequently Asked Questions Question BQuestion C Question D Question EQuestion F Panasonic KX-P6100/6300/6500 Additional Installation Instructions

Related manuals

Manual 9 pages 59.8 Kb