TRENDnet TEW-P1U, TEW-P1P manual TCP/IP Protocol Installation, Restart the computer

Page 52

Select A Desired Protocol

TCP/IP

The TCP/IP Protocol must be installed. For further information, please read “TCP/IP Protocol Installation” section in this chapter.

Note: If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print server” section later in this chapter.

IPX/SPX

The IPX/SPX-compatible Protocol must be installed. For further information, please read “IPX/SPX-compatible Protocol Installation” section in this chapter.

NetBEUI

The NetBEUI protocol must be installed. For further information, please read “NetBEUI Protocol Installation” section in this chapter.

TCP/IP Protocol Installation

1.Click Start, point to Settings and select Control Panel.

2.Double click the Network icon.

3.If the TCP/IP Protocol is not already installed, click Add.

4.Select Protocol and click Add.

5.Select Microsoft from the Manufacturers list.

6.Select TCP/IP Protocol from the Network Protocols list.

7.Specify an IP address, Subnet Mask, and Gateway address or specific “Obtain IP address automatically”, if a DHCP server is available on the LAN.

8.Restart the computer.

50

Image 52

Contents Page Page Network Print Monitor Overview Upgrading the Print Server from Psadmin Trademarks CopyrightFCC Compliance Notice Radio Frequency Notice Important Note FCC Radiation Exposure StatementNetwork configuration Wireless SpecificationsProduct Overview Network ManagementComponents and Features Wireless Print server Before you start, you should prepareHardware Installation Wireless Network Environment Ad-hoc PEER-to-PEER ModeConfiguration Solution Table Setup Operating Function Remarks SystemPreparation Supported NetworksSetup Utility for Windows-based CommentInstalling the Setup Wizard To install Wizard, please follow the directions listed belowPage Page Page Page Page Page Page Page Using PSAdmin Wizard TCP/IP WizardNetWare Wizard Manual Setup Obtain an IP address from a Dhcp server Properties -TCP/IP OptionsSpecify an IP address Upgrade Multiple Print Queues Configuration ResetRefresh Uninstalling the PSAdmin on Windows PC ProcedureIPP Overview Windows NT/2000/XP/2003Page HP Web JetAdmin Overview System RequirementsConfirming Installation and Supply Access Installing HP Web JetAdminConfiguring and Modifying a Device Removing HP Web JetAdmin Utility Overview Using Embedded Web ServerStatus Menu System Status Wireless Status Printer StatusTCP/IP Status Netware Status General Settings NetWare NDS SettingNetWare Bindery Setting Snmp StatusAppleTalk Status Setup Menu System Setup Re-type PasswordWireless Setup Basic SettingsWEP Settings NetWare Setup Installing Print Server on NetWare 4.x/5.x Snmp Setup Installation ProcedureSelect NCF files options Select Edit AUTOEXEC.NCF file Snmp.snmpEnableAuthenTraps System.sysContactSystem.sysName System.sysLocationAppleTalk Setup Recommended Setting Up a Macintosh Computer Network Print MonitorTCP/IP Protocol Installation Restart the computerIPX/SPX-compatible Protocol Installation NetBEUI Protocol InstallationWindows 95/98/Me/NT/2000/XP Installation Procedure Select Printer and PropertiesPage TCP/IP LPR Port Printing Installation Basic TCP/IP Installation OverviewWindows NT LPR Port Printing Installation Assigning an IP AddressUse the Network Print Monitor utility Run Add PrinterWindows 2000/XP Standard TCP/IP Port Printing Installation Run Add Printer, Click Next Page Page Unix Installation Login root Type arp -s IP address Print server‘s node IDSCO Unix OpenServer Type tftp Print server‘s IP addressSUN Solaris Is xxxx a remote printer or a local printer r/l --------- rType enable printer-1 For example enable printer-1 Type lpadmin -pprinter-1 -s Print server‘s IP addressIBM AIX Redhat Linux Open Printer ConfigurationSelect Standard Process Click New button Click Forward button Queue Type field, choose Networked Unix Printer field, choose Postscript Printer UnixWare Printer Connection Type, select On Remote ServerUpgrading the print server from PSAdmin Type tftp -i print server’s IP address put mpsXX.binUpgrading the print server from Browser Upgrading the print server from Unix Through TCP/IPType tftp print server’s IP address Click Upgrade form Browser and select the firmware file Done Power Related Problems General Troubleshooting OverviewPrint Port Related Problems Windows 95/98/Me/NT/2000/XP Troubleshooting Multi-Segment Frame Type 802.2 InstallationSelect Control Panel Frame Type field, select EthernetPrint server Reconfiguration Procedure on Windows NT Print Server Reconfiguration Procedure on Windows 95/98/MeMoving the print server to a New Segment TCP/IP Troubleshooting Novell NetWare TroubleshootingMoving Your Computer to a New Segment Page Page Diagnostic Mode AppendixLoad Default Value Question B Frequently Asked QuestionsQuestion C Question E Question DQuestion F Additional Installation Instructions Panasonic KX-P6100/6300/6500

Related manuals

Manual 9 pages 59.8 Kb