TRENDnet TEW-P1P, TEW-P1U manual Appendix, Diagnostic Mode

Appendix:

Diagnostic Mode

If you had problems to setup your print server in your wireless network, please refer to the

following steps:

1.Change the print server to diagnostic mode by switching the DIP switch to DIAG mode(the side near to power connector.)

2.Change your wireless adapter to 802.11b Ad-hoc mode, and the ESSID is WLAN-PS

3.Run PSAdmin to discover the print server.

4.Select the wireless print server

5.Select wireless and input the ESSID, Channel, Rates that meet your network environment, then press ok.

77