TRENDnet TEW-P1U, TEW-P1P manual Product Overview, Network Management, Network configuration

Page 6

1.Introduction

Product Overview

The external print servers enhance capability by letting you place your printers, plotters, or equality printers at convenient locations directly on the Ethernet network, and by increasing network printer performance and management.

Network Management

The print servers support the Simple Network Management Protocol (SNMP), which remote printer management and a warning. A standard SNMP agent is permanent on these print servers. Any standard SNMP-based application can be used to access and manage these print servers.

Network configuration

The print servers provide an embedded web server that can be accessed via a prop web browser. We also subsidiary Windows-based PSAdmin utility which help administrator to setup print server environment. For example, Netware, Windows 95/98/Me, Windows NT/2000/XP, Mac or Unix system.

Wireless Specifications

Standard

Complies with IEEE 802.11b Direct Sequence Spread

Spectrum(DSSS) standard

 

 

 

 

 

 

Radio Frequency

2.4 GHZ ISM Band

 

 

 

 

 

Media Access Control

Carrier Sense Multiple Access / Collision Avoidance (CSMA/CA)

Method

with ACK

 

 

 

 

 

Modes

Ad-Hoc and Infrastructure (User definable)

 

 

 

 

Data Transfer Rate

1, 2, 5.5, 11 Mbps

 

 

 

 

 

 

Output Power

+13 ~ +17 dBm (typical +15dBm)

 

WEP (Wired Equivalent

Support 64 and 128 bit Encryption

 

Privacy) Encryption

 

 

 

 

Indoor:

Outdoor:

 

35~50 M@ 11Mbps

250M

@ 11Mbps

Typical Operating Ranges

80M @ 5.5 Mbps

350M

@ 5.5Mbps

 

120M @ 2 Mbps

400M

@ 2Mbps

 

150M @ 1Mbps

500M

@ 1Mbps

 

 

 

 

4

Image 6
Contents Page Page Network Print Monitor Overview Upgrading the Print Server from Psadmin FCC Compliance Notice Radio Frequency Notice TrademarksCopyright Important Note FCC Radiation Exposure StatementProduct Overview Network configurationWireless Specifications Network ManagementComponents and Features Wireless Print server Before you start, you should prepareHardware Installation Wireless Network Environment Ad-hoc PEER-to-PEER ModePreparation Configuration Solution TableSetup Operating Function Remarks System Supported NetworksSetup Utility for Windows-based CommentInstalling the Setup Wizard To install Wizard, please follow the directions listed belowPage Page Page Page Page Page Page Page Using PSAdmin Wizard TCP/IP WizardNetWare Wizard Manual Setup Properties -TCP/IP Options Obtain an IP address from a Dhcp serverSpecify an IP address Upgrade Reset Multiple Print Queues ConfigurationRefresh Uninstalling the PSAdmin on Windows PC ProcedureIPP Overview Windows NT/2000/XP/2003Page HP Web JetAdmin Overview System RequirementsInstalling HP Web JetAdmin Confirming Installation and Supply AccessConfiguring and Modifying a Device Removing HP Web JetAdmin Utility Using Embedded Web Server OverviewStatus Menu System Status Wireless Status Printer StatusTCP/IP Status Netware Status NetWare Bindery Setting General SettingsNetWare NDS Setting Snmp StatusAppleTalk Status Setup Menu System Setup Re-type PasswordWireless Setup Basic SettingsWEP Settings NetWare Setup Installing Print Server on NetWare 4.x/5.x Installation Procedure Snmp SetupSelect NCF files options Select Edit AUTOEXEC.NCF file System.sysName Snmp.snmpEnableAuthenTrapsSystem.sysContact System.sysLocationAppleTalk Setup Recommended Setting Up a Macintosh Computer Network Print MonitorTCP/IP Protocol Installation Restart the computerIPX/SPX-compatible Protocol Installation NetBEUI Protocol InstallationWindows 95/98/Me/NT/2000/XP Installation Procedure Select Printer and PropertiesPage TCP/IP LPR Port Printing Installation Basic TCP/IP Installation OverviewUse the Network Print Monitor utility Windows NT LPR Port Printing InstallationAssigning an IP Address Run Add PrinterWindows 2000/XP Standard TCP/IP Port Printing Installation Run Add Printer, Click Next Page Page SCO Unix OpenServer Unix InstallationLogin root Type arp -s IP address Print server‘s node ID Type tftp Print server‘s IP addressSUN Solaris Is xxxx a remote printer or a local printer r/l --------- rType lpadmin -pprinter-1 -s Print server‘s IP address Type enable printer-1 For example enable printer-1IBM AIX Open Printer Configuration Redhat LinuxSelect Standard Process Click New button Click Forward button Queue Type field, choose Networked Unix Printer field, choose Postscript Printer UnixWare Printer Connection Type, select On Remote ServerUpgrading the print server from PSAdmin Type tftp -i print server’s IP address put mpsXX.binUpgrading the print server from Unix Through TCP/IP Upgrading the print server from BrowserType tftp print server’s IP address Click Upgrade form Browser and select the firmware file Done General Troubleshooting Overview Power Related ProblemsPrint Port Related Problems Select Control Panel Windows 95/98/Me/NT/2000/XP TroubleshootingMulti-Segment Frame Type 802.2 Installation Frame Type field, select EthernetPrint Server Reconfiguration Procedure on Windows 95/98/Me Print server Reconfiguration Procedure on Windows NTMoving the print server to a New Segment Novell NetWare Troubleshooting TCP/IP TroubleshootingMoving Your Computer to a New Segment Page Page Diagnostic Mode AppendixLoad Default Value Frequently Asked Questions Question BQuestion C Question D Question EQuestion F Additional Installation Instructions Panasonic KX-P6100/6300/6500
Related manuals
Manual 9 pages 59.8 Kb