Rear Panel
10/100 Ethernet
DC Power
ResetConnector
| DC 5V |
Network Cable | Reset Button |
Connector |
|
Network Cable Connector
The Internet Camera’s rear panel features an
DC Power Connector
The DC power input connector is located on the Internet Camera’s rear panel, and is labeled DC 5V with a single jack socket to supply power to the Internet Camera. Power will be generated when the power supply is connected to a wall outlet.
Reset Button
Reset will be initiated when the reset button is pressed once, and Power LED begins to flash.
Factory Reset will be initiated when the reset button is pressed continuously for three seconds or when Power LED begins to light up. Release the reset button and the Power LED will begin to flash, indicating the Internet Camera is changing to factory reset. The IP address will also return to the default setting as 192.168.0.20.
14 | 15 |