System Administration - Information
The Information menu contains commands for displaying information about the Internet Camera.
Click “Information” in the system administration menu bar and the Information screen will appear as illustrated below:
Click “Home” to return to Welcome Screen
The Information table provides detailed information of the Internet Camera, such as the Model Name, Firmware Version, Mac Address, and IP Address.
System Administration - Tools
The Tools menu contains commands for restarting the Internet Camera.
Click “Tools” in the system administration menu bar and the Tools screen will appear as illustrated below:
Click “Home” to return to Welcome Screen
Reset:
The Reset command restarts the Internet Camera just like turning the device off and on and saved settings are retained. The Reset panel contains the message “Do you really want to reset this device?” and a YES button. If you do not want to reset the Internet Camera, exit the panel without clicking YES; otherwise, click the “YES” button and the reset process will initiate.
Factory Reset:
A factory reset restarts the Internet Camera and returns all of its settings to their default values. The Factory Reset panel contains the message “Do you really want to factory reset this device?” and a YES button. If you do not want to carry out a factory reset command, exit the panel without clicking YES; otherwise, click the “YES” button and factory reset will be initiated.
Note:
The Network must be reconfigured after a Factory Reset.
44 | 45 |