TRENDnet TV-IP100 manual Camera Name, Location, Admin, IP Assignment Important Information

Camera Name:

This field is used to enter a descriptive name for the device.

The default setting for the Camera Name is CS-xxxxxx, where

xxxxxxis the last six digit of the MAC Address. The maximum length is 32 (Printable ASCII).

Location:

This field is used to enter a descriptive name for the location used by the Internet Camera.

Admin:

This field is used to enter the Administrator ID along with the password to access the System Administration settings. Be sure to enter the password twice to confirm the details once in the Admin Password field and again in the Confirm Password field.

The default setting for Admin is blank space (Null String), and you need to key in the Admin ID with a maximum length of 12 (Printable ASCII) characters and enter the Admin Password with a maximum length of 8 (Printable ASCII) characters.

It is highly recommended to set the Admin ID and Admin Password as soon as possible to enable security option for the Internet Camera to function.

IP Assignment:

Important Information

Access to the Internet Camera is done through assigning a proper IP address. Please make sure to use a vacant IP address when you assign the IP address for the Internet Camera. This will prevent errors from occurring if the IP address is overlapped.

There are two options to select from the IP Assignment: Manually Assign or Assign Automatically Using.

Manually Assign

You can click “Manually Assign” and directly enter the IP address.

The default settings are as follows:

•Default IP – 192.168.0.20

•Subnet Mask – 255.255.255.0

•Default Gateway – 0.0.0.0

Assign Automatically Using

If your network is using RARP, BOOTP or DHCP server, you can click “Assign Automatically Using” and then click “RARP”, “BOOTP” or “DHCP”. Under this setting the Internet Camera will automatically assign an IP address from RARP, BOOTP or DHCP server. Every time when the camera starts up, please make sure that the DHCP server is set to assign a static IP address to your camera.

If your application requires direct connection from an ADSL modem through the Internet Camera’s RJ-45 LAN port, and you also have an ISP PPPoE account, click “PPPoE” option and enter the Service Name, User ID and Password into the respective fields. The Internet Camera will get an IP address from the ISP as starting up.

29