TRENDnet TEW653AP manual Click Next

4. Click Next.

5. Select AP Mode and then click Next.

Note:

1.To protect your network from any unauthorized access it is recommended to enable wireless encryption.

2.The examples below are for WPA2-PSK security. If you select WPA-PSK or WPA2-PSK, make sure your wireless adapters support WPA or WPA2. If your wireless adapters do not support WPA or WPA2, then select WEP.

6.Use your mouse to select the desired security level (lowest for no encryption, highest for WPA2-PSK).

7.Enter the desired SSID and Key. Then click Next. By default, the SSID is TRENDnet653.

8.Setup is successful. Click Reboot.

ÐÓÑÑÊÈÉESPAÑOLDEUTSCHFRANÇAISENGLISH

6