TRENDnet TEW653AP manual Using the TEW-653AP with the TPE-111GI, Adapter

Page 6

Using the TEW-653AP with the TPE-111GI

1.Connect the Power Cord to the Power

Adapter.

2.Connect the Power Adapter to the DC 48V IN connector on the TPE-111GI. Then connect the Power Cord to an outlet.

3.Connect a CAT-5 cable from a switch to the TPE-111GI's DATA IN port.

4.Connect a CAT-5 cable from the TEW-653AP's LAN port to the TPE-111GI's PoE Out port.

5.Verify that the wireless, LAN and power LEDs are on. Please refer to step 4 in the Hardware Installation section.

ÐÓÑÑÊÈÉESPAÑOLDEUTSCHFRANÇAISENGLISH

4

Image 6

Contents TEW-653AP Table of Contents Package Contents Before You StartSystem Requirements Hardware Installation Power-over-Ethernet Installation Using the TEW-653AP with a PoE switchUsing the TEW-653AP with the TPE-111GI AdapterConfigure the Access Point Click WizardClick Next Your configuration is complete Register Your ProductMounting Troubleshooting Windows XP/2000Page Do not turn off the Ssid broadcast Wireless TipsAssign your network a unique Ssid Change the channelPage Page GPL/LGPL General Information Certifications GPL/LGPL informações Gerais GPL/LGPL üldinformatsioonProduct Warranty Registration