Pioneer DVR-433H-K manual Getting started Using the built-in TV tuner, Changing TV channels, Nicam

Getting started

Using the built-in TV tuner

04

•If the NICAM audio setting (see Nicam Select on page 94) is set to NICAM and you are watching a NICAM broadcast, you can switch between NICAM and Regular (non-NICAM) audio.

Changing TV channels

There are three different ways to select TV channels. Note that you can’t change the TV channel during playback, recording or during recording standby.

DISPLAY TV/DVD

HELP INPUT SELECT CLEAR

AUDIO SUBTITLE ANGLE

NICAM

Regular

•If the NICAM broadcast is bilingual, you can also select the language.

	CHANNEL
DISCNAVIGATOR	SHOWVIEW
TOP	MENU
MENU
	ENTER
HOME	RETURN
MENU

•CHANNEL +/– buttons on the remote

•Number buttons on the remote – For example, to select channel 4, press 4 then ENTER; for channel 34, press 3, 4, ENTER.1

Changing audio channels

You can change the audio channel of the broadcast or external input signal.

DISPLAY TV/DVD
HELP	INPUT SELECT		CLEAR
AUDIO	SUBTITLE	ANGLE
			CHANNEL
DISCNAVIGATOR			SHOWVIEW
TOP			MENU
MENU
	ENTER
HOME			RETURN
MENU
	REC MODE	BACK CM SKIP
SHIFT	ONE TOUCH	ST0P REC	REC
	COPY

TV DRECT REC

NICAM A NICAM B

Regular NICAM A+B

•You can also select the language for a non-NICAM bilingual broadcast.

A (L) B (R)

A + B (L+R)

•When watching a recording made from an external input with Bilingual recording selected (see External Audio on page 94), you can switch the audio channel between left (L), right (R) or both (L+R).

L R

L+R

Tip

•When recording to the HDD with HDD Recording Format set to Video Mode On, to DVD in Video mode, or on the LPCM setting, only one channel of a bilingual broadcast is recorded. In this case, decide which language you want to record before recording by setting the Bilingual Recording setting (see Bilingual Recording on page 95).

•Press AUDIO (SHIFT + 1) to change the audio. The current audio channel is displayed on-screen.

Note

1. Channel presets are numbered 1–99.

29

En