Pioneer DVR-433H-S, DVR-433H-K manual Playback Component, See Connecting up for connection options

05Recording

Simultaneous recording and	Recording from an external
playback	component
VR mode HDD	VR mode Video mode HDD

A feature called Chase Play makes it possible to watch a recording in progress (DVD or HDD) from the start of the recording (as in, playback is ‘chasing’ the recording). For example, perhaps you have to miss the first 30 minutes of a movie on TV; you can start recording, then start watching the movie, from the beginning, while the recorder is still recording 30 minutes ahead of you.

In fact, you’re not just limited to watching the recording in progress; you can watch anything else already on the DVD or HDD by selecting it from the Disc Navigator screen (see Using the Disc Navigator with recordable discs and the HDD on page 54).

Important

•Note that you must use a DVD-RW Ver. 1.1 / 2x or Ver. 1.2 disc to be able to use this feature.

•You may not be able to use this feature with a DVD-RW disc that was first initialized on another recorder.

•Chase playback is not possible using a VR mode DVD-R disc.

• During recording, press to start playback from

the beginning of the current recording1, or press DISC NAVIGATOR and select another title to play from there.

You can use all the usual playback controls, such as pause, slow-motion play, scan2 and skip.

•	To stop playback, press	(recording will continue).
• To stop recording, press		STOP REC (playback will
	continue).

•During recording or in timer recording standby, you can’t play an HDD title, DVD or Video CD/Super VCD disc if the Input Line System setting doesn’t match the TV line system of the disc/HDD title (see also Additional information about the TV system settings on page 99). Also, during simultaneous recording and playback, if the TV line system of the playback track/title changes then playback will automatically stop.

You can record from an external component, such as a camcorder or VCR, connected to one of the recorder’s external inputs.

STANDBY/ONHDD/DVD

DISPLAY TV/DVD
HELP	INPUT SELECT		CLEAR
AUDIO	SUBTITLE	ANGLE
			CHANNEL
DISCNAVIGATOR			SHOWVIEW
TOP			MENU
MENU
	ENTER
HOME			RETURN
MENU
	REC MODE	BACK CM SKIP
SHIFT	ONE TOUCH	ST0P REC	REC
	COPY

TV DRECT REC

DVD RECORDER

1Make sure that the component you want to record from is connected properly to the DVD recorder.

See Chapter 2 (Connecting up) for connection options.

2Press INPUT SELECT repeatedly to select one of the external inputs to record from.

There are three analog inputs and a DV digital input. The current input is shown on-screen and in the front panel display:

•AV2/L1 – Input 13

•L2 – Input 2 (front panel)

•L3 – Input 3

•DV – DV input (front panel)

Note

1.You can’t start playback immediately after recording starts. Simultaneous playback and recording doesn’t work while copying or backing up. 2.When scanning a DVD, no sound is output if the recorder is also recording the DVD (see Scanning discs on page 56).

3.This cannot be selected if AV2/L1 In is set to Decoder (see AV2/L1 In on page 94).

48

En