Pioneer DVR-433H-K, DVR-433H-S manual Playing CDs and WMA/MP3 discs, Playing Video CD/Super VCDs

Getting started 04

Playing CDs and WMA/MP3 discs

The table below shows the basic playback controls for audio CDs1, and WMA/MP3 files.

Press to start playback.

Playing Video CD/Super VCDs

The table below shows the basic playback controls for Video CD/Super VCDs.

Some discs feature Playback Control (PBC for short) menus. These discs show PBC in the display when you load them and display a menu on-screen from where you

Press to stop playback.

Pauses playback, or restarts playback when paused.

Press to start scanning. Press again to increase the scanning speed. (There are two scan speeds; the current scan speed is shown on-screen.)

Press to skip to previous/next track (or folder for WMA/MP3 disc).

During playback, enter a track number then press ENTER to skip directly to that track.

Press CLEAR to clear a number entry and start again.

ENTER

can select what to watch.2

Press to start playback.

Video CD only: If RESUME is displayed on- screen, playback starts from the place last stopped.

Press to stop playback.

Video CD only: You can resume playback from the same point by pressing . (Press again to cancel the resume function.)

Pauses playback, or restarts playback when paused.

Press to start scanning. Press repeatedly to increase the scanning speed.

Press to skip to previous/next track. When a PBC menu is displayed, press to display the previous/next page.

			During playback, enter a track number
			then press ENTER to skip directly to that
			track.
			Press CLEAR to clear a number entry and
			start again.
		ENTER	While a PBC menu screen is displayed,
			use to select numbered menu items.
			Video CD only: Each press skips backward/
	SHIFT
			forward progressively up to a maximum of
			ten minutes forward or three minutes
BACK CM SKIP
			back. Note that this function doesn’t work
			when playing in PBC mode.
			While paused, press and hold to start
			slow-motion playback. Press repeatedly to
			change the playback speed (forward only).
			While paused, press to advance a single
			frame (forward only).
	RETURN		Press to display the disc menu of a Video
			CD/Super VCD playing in PBC mode.

Note

1.If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is selected using the AUDIO (SHIFT + 1) button (see Switching audio channels on page 61).

2.When playing in PBC mode, some playback features, such as search, repeat and program play are not available. You can play a PBC Video

CD/Super VCD in non-PBC mode by pressing to start playback instead of .

33

En