Pioneer DVR-433H-S, DVR-433H-K manual Connecting up Easy connections

02Connecting up

Easy connections

The setup described below is a basic setup that allows you to watch and record TV programs, and play discs. Other types of connections are explained starting on the following page.

Important

•These connections use SCART cables (not supplied). If your TV (or VCR) does not have a SCART connection, see the following page for connecting up using the supplied audio/video cable.

•The AV1(RGB)-TVAV connector can output ordinary (composite), S-video or RGB video, plus stereo analog audio. The AV2/AUTO START REC(INPUT 1/DECODER) connector accepts ordinary, S-video and RGB video input, as well as stereo analog audio. See AV1 Out on page 94 and AV2/L1 In on page 94 for how to set them up.

•Before making or changing any rear panel connections, make sure that all components are switched off and unplugged from the wall outlet.

SCART AV

CONNECTOR

TV

4

ANTENNA

IN

3

ANTENNA

OUT

1	Connect the cable from the antenna/cable TV
outlet to the antenna input on your VCR.
	• If you are not connecting a VCR in the chain, connect
	it to the ANTENNA IN (RF IN) jack on this recorder
	and skip the next step.
2	Use an RF antenna cable (one is supplied) to
connect the antenna output of your VCR to the
ANTENNA IN (RF IN) of this recorder.
3	Use another RF antenna cable to connect the

	COMPONENT VIDEO OUT
AC IN	Y	PB	IN	OUT
AV 2/AUTO START REC (INPUT 1/DECODER)	AV 1 (RGB) – TV		ANTENNA

CONTROL	DIGITAL	R		L
	OUT
	OPTICAL
IN			AUDIO	VIDEO	PR
		S-VIDEO			S-VIDEO
				OUTPUT

ANTENNA

IN (RF IN)

5 2

SCART AV

CONNECTOR

ANTENNA

OUT

VCR	ANTENNA
	IN

1

Antenna/cable TV wall outlet

ANTENNA OUT of this recorder to the antenna input
on your TV.
4	Use a SCART cable (not supplied) to connect the
AV1(RGB)-TV AV connector on this recorder to the
SCART AV connector on your TV.
5	Use another SCART cable to connect the AV2/
AUTO START REC(INPUT 1/DECODER) AV connector
to a SCART AV connector on your VCR.

Tip

•This recorder has a ‘through’ function which allows you to record a TV program from the built-in TV tuner in this recorder while watching a video playing on your VCR. (To use this feature when the recorder is in standby, Power Save must be set to Off—see Power Save on page 92).

14

En