Pioneer DVR-433H-K manual Confirm that the settings are correct, Select ‘Store Program’ to finish

Recording

6Press ENTER to set the end time.

7Select ‘Yes’ to set the timer recording and exit, or ‘No’ to go back to the timer recording screen.

05

1Press ‘VIDEO Plus+ (SHIFT + MENU)’ to display the VIDEO Plus+ program screen.

You can also access this screen from the Home Menu (press HOME MENU, select Timer Recording, then VIDEO Plus+).

Timer recording using the VIDEO Plus+® programming system

This system makes programming timer recordings very simple. Most TV guides publish PlusCode programming numbers with their program details. If you want to make a timer recording of a program, you just input the corresponding code. The date, start, stop and channel settings are made automatically. All you have to do is tell the recorder the recording mode, and whether it’s a once-only recording or a regular recording.

PlusCode#

1 2 3

4 5 6

7 8 9

0 Clear

Cancel

Enter

STANDBY/ONHDD/DVD

DISPLAY TV/DVD
HELP	INPUT SELECT		CLEAR
AUDIO	SUBTITLE	ANGLE
			CHANNEL
DISCNAVIGATOR		VIDEO Plus+
TOP			MENU
MENU
	ENTER
HOME			RETURN
MENU
	REC MODE	BACK CM SKIP
SHIFT	ONE TOUCH	ST0P REC	REC
	COPY

TV DRECT REC

DVD RECORDER

•Use the number buttons to enter the PlusCode programming number. (To clear the last digit entered, press CLEAR.)

• You can also use the	buttons to select
digits from the on-screen display.

2After making the settings, select ‘Enter’ and press ENTER.

The timer recording screen appears with the timer program you just set.

3Confirm that the settings are correct.

If the channel number isn't displayed, use the

buttons to highlight CH, then use the buttons to set the correct channel number.

•If the channel number is set, but incorrectly, set up the guide channel (see Set VIDEO Plus+ CH on page 93).

4Select ‘Store Program’ to finish.

•Other options in the same menu panel allow you to name the program, and change the recording destination and/or recording mode.

43

En