Pioneer DVR-433H-S Editing a timer program, Deleting a timer program, Programming a new end time

05Recording

•If the HDD is being used for playback or high-speed copying when an Auto Replace Recording is due to start, the new timer recording will not replace the old one. However, the next time the timer recording starts, both of the older two programs will be erased.

Editing a timer program

You can change any of the settings in a timer program before the recording is due to start.

1Press TIMER REC.

2Highlight the timer program you want to change.

3 Press then select ‘Modify’ from the command menu panel.

Alternatively, press ENTER.

The Timer Program Set screen appears from which you can edit the settings.

4Edit the timer recording settings as necessary.

5Select ‘Store Program’ to finish.

Confirm the settings you made from the following screen.

Deleting a timer program

You can delete timer programs you no longer need.

1Press TIMER REC.

2Highlight the timer program you want to erase.

3 Press then select ‘Erase’ from the command menu panel.

•Select Yes to confirm or No to cancel.

•You can also just press CLEAR when the timer program is highlighted.

Skipping a regular timer program

If you’ve set a regular daily or weekly timer program, you can set the recorder to skip the next scheduled recording.

1Press TIMER REC.

2Highlight the timer program you want to skip.

3 Press then select ‘Cancel Once’ from the command menu panel.

You can also just press when the timer program is highlighted.

•In the timer program list, Cancel Once appears by the program.

Extending a timer recording in progress

You can extend a timer recording beyond the programmed end time in two different ways. This can be useful if a broadcast program overruns, for example.

	DISCNAVIGATOR	SHOWVIEW
	TOP	MENU
	MENU
	ENTER
	HOME	RETURN
	MENU
	REC MODE	BACK CM SKIP
	ONE TOUCH	ST0P REC REC
	SHIFT COPY
		TV DRECT REC
Moving the end time by 30-minute blocks
1	During timer recording, press and hold REC for
three seconds.
The timer indicator disappears from the front panel
display.
2	Press REC repeatedly to extend recording in 30

minute increments.

Programming a new end time

You can edit the end time of a timer recording you have previously set.

1Press TIMER REC.

2Highlight the timer program you want to change.

3 Press then select ‘Modify’ from the command menu panel.

Alternatively, press ENTER.

The Timer Program Set screen appears from which you can edit the settings.

4Edit the end time as necessary.

•You can also edit the Extend time parameter.

5Select ‘Store Program’ then press ENTER.

6To exit the timer recording screen, press HOME MENU.

46

En