Pioneer DVR-433H-S, DVR-433H-K manual Decoder Wall outlet

02Connecting up

Connecting an external decoder box (2)

If you only have a decoder, connect it to this recorder and your TV as shown on this page.1

Using the setup on this page you can:

• Record scrambled channels received using the recorder’s built-in TV tuner.

Important

•Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amplifier/receiver.

SCART AV
CONNECTOR
2	TV

ANTENNA

IN

1

ANTENNA

OUT

1 Connect RF antenna cables as shown.

This enables you to watch and record TV channels.

2Use a SCART cable (not supplied) to connect the AV1(RGB)-TV AV connector to a SCART AV connector on your TV.

This enables you to watch discs.

3Use another SCART cable to connect the AV2/ AUTO START REC(INPUT 1/DECODER) AV connector to a SCART AV connector on your decoder box. This enables you to record scrambled TV channels.

	COMPONENT VIDEO OUT
AC IN	Y	PB	OUT
AV 2/AUTO START REC (INPUT 1/DECODER)	AV 1 (RGB) – TV

CONTROL	DIGITAL	R		L
	OUT
	OPTICAL
IN		S-VIDEO	AUDIO	VIDEO	PR
					S-VIDEO
				OUTPUT

ANTENNA

IN (RF IN)

3	1
SCART AV
CONNECTOR
	Antenna/cable TV
Decoder	wall outlet

Note

1 In order to use this setup, you will need to make the following settings from the Initial Setup menu:

•Set the AV2/L1 In setting to Decoder from the Initial Setup menu (see AV2/L1 In on page 94).

•From the Manual CH Setting screen, set the Decoder setting for the scrambled channels to On (see Manual CH Setting on page 93).

18

En