Pioneer DVR-433H-S, DVR-433H-K manual Initial Setup menu Chapter, Using the Initial Setup menu

13The Initial Setup menu

Chapter 13

The Initial Setup menu

Using the Initial Setup menu

The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.

Some settings can only be changed when the recorder is stopped. During playback and recording these settings are grayed out in the Initial Setup menu.

Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.

•Press HOME MENU and select ‘Initial Setup’.

In the table below, the default option is marked with a •.

Setting	Options	Explanation
Basic Settings
Clock Setting	Auto	Set the channel that broadcasts a clock signal and the clock will be set
		automatically.
	Manual •	If there is no channel that broadcasts a clock signal in your area, you
		can set the time and date manually.

The clock must be set in order to use timer recording.

Input Line System	525 System	Use for NTSC or PAL-60 recording from an external input.
	625 System •	Use for standard PAL or SECAM recording.

See also About the input line system on page 99 for more information on this setting.

Power Save	Mode 1	Only signals arriving at the antenna input are passed through to the
		antenna output when the recorder is in standby.
	Mode 2	No input signals are passed through to the outputs when the recorder
		is in standby.
	Off •	When the recorder is in standby, all signals arriving at the SCART and
		antenna inputs are passed along to the outputs.
Help Setting	On •	Switches on the automatic Help screens for GUI displays.
	Off	Switches off the automatic Help screens for GUI displays. (Press HELP
		on the remote to manually display the Help screen.)
Setup Navigator	Start	Select to start the Setup Navigator. See also Switching on and setting
		up on page 25.

92

En