TRENDnet TEW653AP manual Your configuration is complete, Register Your Product

Page 9

DEUTSCHFRANÇAISENGLISH

9. Wait 24 seconds while the Access Point reboots.

10.Click System -> LAN. Configure the LAN settings to match your network settings and

then click Apply.

11.Wait 14 seconds while the Access Point reboots.

ESPAÑOL

Your configuration is complete

For detailed information regarding the TEW-653AP’sconfiguration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com.

ÐÓÑÑÊÈÉ

Register Your Product

To ensure the highest level of customer service and support, please take a moment to register your product Online at: www.trendnet.com/register

Thank you for choosing TRENDnet

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents TEW-653AP Table of Contents Package Contents Before You StartSystem Requirements Hardware Installation Using the TEW-653AP with a PoE switch Power-over-Ethernet InstallationAdapter Using the TEW-653AP with the TPE-111GIClick Wizard Configure the Access PointClick Next Register Your Product Your configuration is completeMounting Windows XP/2000 TroubleshootingPage Assign your network a unique Ssid Wireless TipsDo not turn off the Ssid broadcast Change the channelPage Page GPL/LGPL General Information GPL/LGPL informações Gerais GPL/LGPL üldinformatsioon CertificationsProduct Warranty Registration
Top Page Image Contents