Technical Specifications
For use with Transition Networks Model
Standards | IEEE 802.3™ |
| |
Data Rate: | 10 Mbps, 100 Mbps | ||
Dimensions | 3.4" x 5" x 1" (86 mm x 127 mm x 25.4 mm) | ||
Weight | 4 oz. (114 g approximate) | ||
Power Consumption: | 3.0 W |
| |
MTBF | 280,232 | ||
| 770,637 Bellcore Hours | ||
Packet Size: | Unicast MAC address: 1K | ||
| Maximum packet size: | ||
| - | 1916 bytes untagged bytes | |
| - | 1912 bytes tagged bytes | |
Environment | Tmra*: | 0 to 50°C (32 to 122°F ) | |
| Storage Temp: |
| |
| Humidity | 5 to 95%, non condensing | |
Warranty | Lifetime |
| |
*Manufacturer’s rated ambient temperature: Tmra range for this
The information in this user’s guide is subject to change. For the most
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR, Subchapter J applicable at the date of manufacture.
CAUTION: Visible and invisible laser radiation when open. Do not stare into beam or view directly with optical instruments.
CAUTION: Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
The fiber optic transmitters on this converter meet Class I Laser safety requirements per
Troubleshooting
If the media converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action:
1.Is the PWR (power) LED illuminated?
NO
•Is the media converter inserted properly into the chassis?
•Is the power cord properly installed in the chassis and at the external power source and does the external power source provide power?
•Contact Technical Support: US/Canada:
YES
•Proceed to step 2.
2.Is the Link/Activity (twisted-pair link) LED illuminated?
NO
•Check the copper cables for proper connection and pin assignment.
•Contact Technical Support: US/Canada:
YES
•Proceed to step 3.
3.Is the LACT (fiber-pair link) LED illuminated?
NO
•Check the fiber cables for proper connection.
•Verify that the TX and RX cables are connected to the RX and TX ports, respectively, on the
•Contact Technical Support: US/Canada:
YES
•Proceed to step 4.
4.Is the Speed (twisted-pair speed) LED illuminated?
NO
•Check the copper cables for proper connection.
•Off = The media converter has selected 10Mbps operation.
•If the speed is not correct, disconnect and reconnect the twisted pair cable to restart the initialization process.
•Contact Technical Support: US/Canada:
YES
•On = The media converter has selected 100Mbps operation.
•If the speed is not correct, disconnect and reconnect the twisted pair cable to restart the initialization process.
•Contact Technical Support: US/Canada:
12 | techsupport@transition.com | 13 |